Prestige Facet SUB8.1 - Speaker ELIPSON - Free user manual and instructions
Find the device manual for free Prestige Facet SUB8.1 ELIPSON in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Active subwoofer |
| Brand | Elipson |
| Model | Prestige Facet SUB8.1 |
| Speaker type | Sealed subwoofer |
| Driver | 1 x 8 inch (20 cm) cellulose |
| Amplification | Class D, 200 W RMS |
| Frequency response | 35 Hz - 200 Hz |
| Low-pass filter | Built-in, adjustable from 40 Hz to 180 Hz |
| Phase | 0°/180° switch |
| Inputs | 1 x RCA (LFE), 1 x high-level input (binding post) |
| Outputs | 1 x high-level output (binding post) |
| Power supply | 230 V / 50 Hz, max. consumption 350 W |
| Dimensions (W x H x D) | 300 x 400 x 400 mm |
| Weight | 12.5 kg |
| Finish | Black or walnut wood veneer (depending on version) |
| Main features | Volume control, adjustable low-pass filter, phase switch, auto standby mode |
| Maintenance and cleaning | Dust with a soft dry cloth; do not use solvents |
| Safety | Unplug before cleaning; do not expose to moisture |
| Spare parts and repairability | Contact Elipson customer service or an authorized dealer |
Frequently Asked Questions - Prestige Facet SUB8.1 ELIPSON
How to connect the Prestige Facet SUB8.1 subwoofer to my home theater receiver?
Use an LFE (subwoofer) output on your receiver and connect it to the RCA LFE input on the subwoofer. Set the low-pass filter to its maximum position (180 Hz) and the volume to halfway. Then adjust to your liking.
What to do if the subwoofer does not turn on?
First check that the power cord is properly connected and that the wall outlet works. Make sure the power/standby switch is in the 'On' position. If the problem persists, try another outlet.
How to adjust the low-pass filter on the SUB8.1?
The low-pass filter is adjusted with a potentiometer on the rear panel. Turn it to cut frequencies above the desired value. For integration with satellite speakers, set it to about 80 Hz.
What is the phase switch (0°/180°) used for?
The phase switch corrects frequency cancellations between the subwoofer and the main speakers. Try both positions and keep the one that gives the best bass, i.e., the most present and consistent.
Does the subwoofer heat up normally?
A slight warmth on the amplifier is normal during operation. If the cabinet becomes very hot to the touch, make sure it is not placed in a confined space and leave at least 10 cm clearance around the ventilation fins.
How to clean the Prestige Facet SUB8.1 subwoofer?
Dust regularly with a soft dry cloth. For marks, use a cloth slightly dampened with water, without solvent or abrasive product. Never pour liquid directly on the device.
Can the subwoofer be placed in a closed cabinet?
It is not recommended to place the subwoofer in a completely closed space, as this can affect sound quality and cause overheating. If you must embed it, provide an opening of at least 20 cm in front of the driver.
What cables to use to connect the SUB8.1?
For an LFE connection, use a shielded RCA cable. For a high-level connection (binding post), use speaker cable with a cross-section of 2.5 mm². Avoid cables that are too long (maximum 10 m) to limit losses.
How to activate/deactivate auto standby mode?
Auto standby activates automatically after a few minutes without an audio signal. To deactivate it, press and hold the 'Power' button (or depending on model) for 3 seconds. Refer to the manual for detailed information.
What to do if the subwoofer sound is weak or distorted?
First check the volume and filter settings. Make sure the phase is correctly set. Try another source or another cable. If the problem persists, the driver or amplifier may be defective; contact customer service.
User questions about Prestige Facet SUB8.1 ELIPSON
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual Prestige Facet SUB8.1 - ELIPSON and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Prestige Facet SUB8.1 by ELIPSON.
USER MANUAL Prestige Facet SUB8.1 ELIPSON
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ELIPSON
Model : Prestige Facet SUB8.1
Category : Speaker