HERMES9005SM - Basket KKT Kolbe - Free user manual and instructions
Find the device manual for free HERMES9005SM KKT Kolbe in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Chimney hood (wall-mounted) |
| Brand | KKT Kolbe |
| Model | HERMES9005SM |
| Width | 90 cm |
| Depth | 50 cm |
| Height (min-max) | 65 - 110 cm |
| Weight | Approx. 15 kg |
| Power Supply | 220-240 V ~ 50 Hz |
| Maximum Extraction Rate | 650 m³/h |
| Noise Level (max) | 65 dB(A) |
| Number of Speeds | 3 speeds + intensive |
| Controls | Sliding or push-button |
| Lighting | 2 x 1.5 W LED (warm white) |
| Filter Type | Grease filter: aluminium; Charcoal filter (optional) for recirculation |
| Ducting | Ducted (150 mm diameter) or recirculating |
| Energy Class | A+ |
| Installation Type | Wall-mounted, chimney |
| Maintenance | Clean grease filter monthly; replace charcoal filter every 3-6 months |
| Safety Features | Motor thermal protection, auto shut-off (optional) |
| Spare Parts | Filters, LED lamps, control switches available |
| Repairability Index | 8.0 / 10 |
| General Information | Stainless steel finish, telescopic chimney, suitable for gas and electric hobs |
Frequently Asked Questions - HERMES9005SM KKT Kolbe
How do I install the KKT Kolbe HERMES9005SM hood?
Installation should be done by a qualified professional. Ensure the hood is mounted at least 65 cm above electric hobs and 75 cm above gas hobs. Secure the chimney and connect to the ducting or set up recirculation mode with charcoal filters.
How do I clean the grease filters?
Remove the aluminium grease filters and wash them by hand with warm water and mild detergent, or in a dishwasher at low temperature. Dry thoroughly before reinstalling. Clean monthly for optimal performance.
How often should I replace the charcoal filter?
Charcoal filters should be replaced every 3 to 6 months depending on usage. They are not washable and must be replaced when saturated to maintain extraction efficiency.
Why is my hood making loud noises?
Loud noises can be due to clogged filters, loose ducting, or improper installation. Check and clean the filters, ensure duct connections are tight, and that the hood is securely mounted.
How do I change the LED bulb?
This hood uses integrated LED modules. To replace, contact KKT Kolbe customer service or a qualified technician. Do not attempt to replace LEDs yourself if not serviceable.
What should I do if the hood does not turn on?
Check the power supply and circuit breaker. Ensure the plug is connected. If still not working, the internal fuse or motor may be faulty. Contact customer support.
Can I use the hood in recirculation mode?
Yes, you can use it in recirculation mode by installing charcoal filters (sold separately). The hood comes ready for ducted mode; conversion requires adding filters and routing the air back into the room.
What is the warranty period for this hood?
KKT Kolbe offers a 2-year warranty on manufacturing defects. Extended warranty may be available. Keep your proof of purchase.
How do I reset the filter saturation indicator?
After cleaning or replacing filters, press and hold the speed button for 3 seconds until the indicator light turns off. Refer to the manual for exact procedure.
Is the hood compatible with induction hobs?
Yes, the HERMES9005SM is suitable for all types of hobs, including induction, electric, and gas, as long as the minimum installation height is observed.
User questions about HERMES9005SM KKT Kolbe
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Basket in PDF format for free! Find your manual HERMES9005SM - KKT Kolbe and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HERMES9005SM by KKT Kolbe.