ECCO HCM - Basket KKT Kolbe - Free user manual and instructions
Find the device manual for free ECCO HCM KKT Kolbe in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range hood (wall-mounted) |
| Brand | KKT Kolbe |
| Model | ECCO HCM |
| Width | 600 mm |
| Depth | 500 mm |
| Height | 700–1100 mm (adjustable) |
| Weight | 15 kg |
| Power Supply | 220–240 V, 50 Hz |
| Motor Power | 200 W |
| Extraction Rate (max) | 600 m³/h |
| Noise Level (max) | 65 dB(A) |
| Lighting | LED, 2 × 3 W |
| Control Type | Electronic push buttons |
| Number of Speeds | 3 + intensive |
| Grease Filter | Aluminum mesh, dishwasher safe |
| Carbon Filter (optional) | Yes, for recirculation mode |
| Exhaust Outlet | 150 mm diameter |
| Energy Efficiency Class | A+ |
| Annual Energy Consumption | 50 kWh/year |
| Cleaning Recommendation | Clean filters every 2 months; wipe surfaces with damp cloth |
| Safety Features | Motor thermal protection, auto shut-off |
| Accessories Included | 1 grease filter, 1 carbon filter (if applicable), mounting kit |
| Warranty | 2 years |
Frequently Asked Questions - ECCO HCM KKT Kolbe
How do I install the ECCO HCM range hood?
Refer to the installation manual. Ensure the hood is mounted at least 65 cm above gas hobs and 50 cm above electric hobs. Use the included mounting kit and follow the step-by-step instructions for wall mounting.
How often should I clean the grease filter?
Clean the aluminum mesh grease filter every 2 months under normal usage. It is dishwasher safe; wash at low temperature (max 65°C) and dry completely before reinserting.
Can I use the hood in recirculation mode?
Yes, you can. Install an optional carbon filter (model CF-ECCO) for recirculation mode. Replace the carbon filter every 4-6 months depending on cooking frequency.
What should I do if the hood stops working?
Check the power supply and fuse. Ensure the motor has not overheated (thermal protection may have activated). Wait 15 minutes and restart. If problem persists, contact KKT Kolbe support.
How do I replace the LED lights?
The LED lights are integrated and not user-replaceable. If defective, contact an authorized service center for replacement.
What is the maximum extraction rate?
The maximum extraction rate is 600 m³/h in intensive speed. Normal speeds range from 250 to 450 m³/h.
Is the hood noisy?
Noise levels vary by speed: approximately 45 dB(A) on low, 55 dB(A) on medium, and 65 dB(A) on high. The intensive speed may be louder.
How do I adjust the chimney height?
The telescopic chimney can be adjusted from 700 mm to 1100 mm. Loosen the fixing screws, slide the upper section to the desired height, then tighten the screws securely.
What type of ducting should I use?
Use a rigid or flexible exhaust duct with a diameter of 150 mm. Ensure the duct is as short and straight as possible for optimal performance.
Where can I find spare parts?
Spare parts such as filters, bulbs, and motors are available from KKT Kolbe authorized dealers. Use the model number ECCO HCM when ordering.
User questions about ECCO HCM KKT Kolbe
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Basket in PDF format for free! Find your manual ECCO HCM - KKT Kolbe and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ECCO HCM by KKT Kolbe.