Bolero DressCode Dry 8400 A++ - Tumble drier CECOTEC - Free user manual and instructions
Find the device manual for free Bolero DressCode Dry 8400 A++ CECOTEC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Condenser tumble dryer |
| Brand | Cecotec |
| Model | Bolero DressCode Dry 8400 A++ |
| Energy class | A++ |
| Drying capacity | 8 kg |
| Dimensions (W x D x H) | 60 x 60 x 85 cm |
| Net weight | 45 kg |
| Power supply | 230 V / 50 Hz |
| Rated power | 2400 W |
| Drying programs | 15 programs including cotton, synthetics, delicates, rapid |
| Anti-crease function | Yes |
| Delayed start | Yes, up to 24 hours |
| Child lock | Control panel lock |
| Noise level | 65 dB(A) |
| Sensor type | Humidity sensor |
| Filter maintenance | Clean after each cycle |
| Water tank draining | Removable tank, empty after each cycle |
| Easy iron function | Yes |
| Display screen | LED |
Frequently Asked Questions - Bolero DressCode Dry 8400 A++ CECOTEC
How to clean the filter of my Cecotec Bolero DressCode Dry 8400 A++ tumble dryer?
Open the door, remove the filter located at the bottom of the opening, remove the lint by hand or with a vacuum cleaner, rinse it under warm water if necessary, dry it and put it back. Do this after each cycle to avoid blockages.
What is the maximum load capacity of this tumble dryer?
The maximum capacity is 8 kg for optimal drying. Do not exceed this limit to avoid overloading and ensure drying efficiency.
How to use the delayed start on the Bolero DressCode Dry 8400 A++?
Select your program, then press the 'Delayed start' button until the desired time (from 1 to 24 hours). The appliance will start automatically at the set time.
Why does my tumble dryer not heat up?
First check that the filter is not clogged and that the water tank is not full. If the problem persists, check that the power outlet works and that the circuit breaker has not tripped. If necessary, contact after-sales service.
Can I dry woolen clothes in this tumble dryer?
Yes, use the special 'Wool' or 'Delicates' program and set low temperature. Check the care label of your clothes to confirm they can go in the tumble dryer.
How to empty the condensation water tank?
Gently pull the tank located at the bottom right of the appliance (or according to your model), empty it into a sink, replace it and make sure it is properly engaged. Do this after each cycle or as soon as the indicator lights up.
What does error code E1 on the screen mean?
The E1 code usually indicates a problem with the humidity sensor or internal communication. Try turning the appliance off and on again. If the code persists, call technical support.
How to activate the child lock?
Press simultaneously the 'Delayed start' and 'Anti-crease' buttons (or refer to the manual) for 3 seconds. An indicator will show that the function is activated. To deactivate, repeat the operation.
What is the noise level of this tumble dryer?
The noise level is approximately 65 dB(A) during normal operation, which is comparable to a conversation. Place the appliance on a stable surface to minimize vibrations.
Where can I find spare parts for my Cecotec Bolero DressCode Dry 8400 A++?
You can order spare parts from Cecotec customer service, on their official website or from authorized resellers. Use the model number to identify the exact part.
User questions about Bolero DressCode Dry 8400 A++ CECOTEC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble drier in PDF format for free! Find your manual Bolero DressCode Dry 8400 A++ - CECOTEC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Bolero DressCode Dry 8400 A++ by CECOTEC.