Liverpool TLX43-FLB - Speaker Turbosound - Free user manual and instructions
Find the device manual for free Liverpool TLX43-FLB Turbosound in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Passive line array loudspeaker element |
| Model | Liverpool TLX43-FLB |
| Brand | Turbosound |
| Dimensions (H x W x D) | 150 mm x 430 mm x 230 mm (5.9" x 16.9" x 9.1") |
| Weight | 5.5 kg (12.1 lbs) |
| Power Handling (RMS) | 120 W |
| Impedance | 16 ohms |
| Frequency Response | 120 Hz - 20 kHz (-3 dB) |
| Sensitivity | 90 dB SPL (1W/1m) |
| Drivers | 2 x 4" (100 mm) low-frequency, 1 x 1" (25 mm) high-frequency compression driver |
| Connectors | 2 x Neutrik speakON NL4 |
| Enclosure Material | Birch plywood with semi-matt black paint |
| Grille | Powder-coated perforated steel |
| Mounting | Flying frame integrated (FLB version) |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Power Supply | Passive (no built-in amplifier) |
| Main Features | Line array configuration, high SPL, lightweight design, rigging hardware included |
| Cleaning Instructions | Clean with a soft dry cloth; do not use solvents or abrasive cleaners |
| Safety | Use only with approved rigging hardware; ensure secure mounting to prevent falling |
| Spare Parts | Replaceable drivers and crossover; contact Turbosound service for genuine parts |
| Repairability | Designed for serviceability; drivers and network board accessible from front or rear |
Frequently Asked Questions - Liverpool TLX43-FLB Turbosound
What is the impedance of the Liverpool TLX43-FLB?
The impedance is 16 ohms, allowing multiple units to be paralleled on an amplifier channel.
Can I use this speaker without a subwoofer?
Yes, but for full-range reproduction, we recommend using a subwoofer to handle frequencies below 120 Hz.
How do I connect the TLX43-FLB to an amplifier?
Use Neutrik speakON NL4 cables. Connect to the input connector; the link connector allows daisy-chaining.
What is the maximum SPL of this speaker?
Maximum peak SPL is 122 dB (measured at 1m).
Is the flying frame included?
Yes, the FLB variant includes an integrated flying frame for suspension in vertical arrays.
What type of amplifier is recommended?
A professional power amplifier rated at 250-400W per channel into 16 ohms is suitable.
How do I clean the speaker grille?
Vacuum the grille gently to remove dust. For deeper cleaning, remove the grille and wash with mild soap and water.
Can I use this speaker outdoors?
It is not weatherproof; protect from rain and extreme humidity. Use a cover when not in use.
What is the warranty period?
Turbosound offers a 5-year limited warranty on passive loudspeakers from the date of purchase.
How can I obtain spare parts?
Contact your local Turbosound dealer or distributor for genuine replacement drivers and crossover parts.
User questions about Liverpool TLX43-FLB Turbosound
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual Liverpool TLX43-FLB - Turbosound and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Liverpool TLX43-FLB by Turbosound.
USER MANUAL Liverpool TLX43-FLB Turbosound
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Turbosound
Model : Liverpool TLX43-FLB
Category : Speaker