Liverpool TLX43 - Speaker Turbosound - Free user manual and instructions
Find the device manual for free Liverpool TLX43 Turbosound in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Line Array Loudspeaker |
| Dimensions (HxWxD) | 600 x 350 x 350 mm |
| Weight | 22 kg |
| Frequency Response | 65 Hz – 20 kHz (-10 dB) |
| Power Handling | 400 W continuous, 1600 W peak |
| Impedance | 8 ohms |
| Sensitivity (1W/1m) | 97 dB |
| Crossover Type | Passive |
| Connectors | 2 x Neutrik speakON NL4 |
| Enclosure Material | Birch plywood with polyurethane coating |
| Grille Material | Powder-coated steel with acoustically transparent foam |
| Suspension Hardware | Integrated rigging points for flying |
| Application | Live sound reinforcement, fixed install |
| Safety Compliance | CE, RoHS |
| Cleaning and Maintenance | Wipe with a dry or slightly damp cloth; avoid solvents |
| Spare Parts and Repairability | Contact Turbosound authorized service centers |
Frequently Asked Questions - Liverpool TLX43 Turbosound
What is the recommended amplifier power for the TLX43?
Use an amplifier capable of delivering 400–800 W continuous at 8 ohms per speaker. Do not exceed the peak rating of 1600 W to avoid damage.
Can the TLX43 be used as a standalone speaker without subwoofers?
Yes, but for full-range performance a subwoofer is recommended as the low-frequency extension is 65 Hz. Pair with Turbosound Liverpool TLX18S subwoofers for optimal bass.
How do I connect multiple TLX43 units in a line array?
Use the integrated rigging hardware to mechanically link cabinets. Electrically, daisy-chain via the speakON NL4 connectors, observing proper polarity. Always follow the rigging manual for safe assembly.
What cables are required for TLX43?
Use 2-conductor or 4-conductor speakON cables. For passive mode, pins 1+ and 1- are used. Ensure cables are rated for the power output of your amplifier.
How do I clean the TLX43 grille?
Remove the grille by unscrewing the retaining screws. Vacuum the foam gently, or wash with mild soap and water. Let dry completely before reattaching. Do not use compressed air which may damage the foam.
Is the TLX43 suitable for outdoor use?
The enclosure has a weather-resistant coating, but it is not waterproof. For outdoor events, protect from direct rain. Use a weather cover when not in use.
What is the coverage angle of the TLX43?
The horizontal coverage is 90°, vertical coverage depends on the array configuration. Typically 10° per cabinet when arrayed. Consult the line array calculator for precise coverage.
My TLX43 produces no sound – what should I check?
First verify the amplifier is on and signal is present. Check speakON connections for full insertion. Test with a known good cable. If still silent, inspect the internal fuse (if applicable) or contact support.
Can I use the TLX43 as a floor monitor?
Yes, the cabinet has a wedge angle shape. Place on its side to achieve the desired monitor angle. Ensure the rigging hardware does not interfere with floor placement.
Where can I find replacement drivers for TLX43?
Contact Turbosound or an authorized distributor. Use only genuine Turbosound replacement parts to maintain performance and warranty.
User questions about Liverpool TLX43 Turbosound
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual Liverpool TLX43 - Turbosound and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Liverpool TLX43 by Turbosound.
USER MANUAL Liverpool TLX43 Turbosound
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Turbosound
Model : Liverpool TLX43
Category : Speaker