TFA-600HW - Speaker Turbosound - Free user manual and instructions
Find the device manual for free TFA-600HW Turbosound in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | High-Output Passive Loudspeaker |
| Woofer Size | 15" (381 mm) Neodymium |
| High-Frequency Driver | 1.4" (35.6 mm) Neodymium Compression Driver |
| Frequency Response (-10 dB) | 45 Hz - 20 kHz |
| Power Handling (Program) | 600 W |
| Power Handling (Peak) | 2400 W |
| Impedance | 8 Ω |
| Maximum SPL | 134 dB peak |
| Nominal Dispersion | 60° x 40° (rotatable horn) |
| Crossover Frequency | 1.5 kHz (passive) |
| Connectors | 2 x Neutrik speakON NL4 |
| Rigging | 12 x M10 threaded inserts, track rigging |
| Dimensions (H x W x D) | 700 x 450 x 410 mm (27.6 x 17.7 x 16.1 in) |
| Weight | 28.5 kg (62.8 lbs) |
| Enclosure Material | 15 mm birch plywood, black textured paint |
| Grille | Powder-coated perforated steel with acoustic foam |
| Application | Portable PA, installed sound, live music |
| Safety Features | Strain relief, overcurrent protection, thermal protection |
| Maintenance | Clean grille with dry cloth; inspect connectors periodically |
| Spare Parts | Replacement drivers, grille, speakON connectors available |
| Compliance | CE, RoHS |
Frequently Asked Questions - TFA-600HW Turbosound
What is the recommended amplifier power for the TFA-600HW?
For optimal performance, use an amplifier delivering 600 W to 1200 W into 8 Ω per channel. Ensure the amplifier can handle 4 Ω loads if running multiple speakers in parallel.
Can the TFA-600HW be used outdoors?
Yes, but it is not weatherproof. Use a weather cover or place it under shelter. Avoid direct exposure to rain or extreme humidity.
How do I mount the speaker on a tripod stand?
The TFA-600HW has a 36 mm pole socket on the bottom. Use a heavy-duty tripod stand rated for at least 35 kg. Ensure the stand is fully extended and locked before mounting.
What is the correct impedance setting if using multiple speakers?
When connecting two TFA-600HW in parallel, the impedance becomes 4 Ω. Ensure your amplifier is stable at 4 Ω. For three or more, use a series-parallel configuration to keep impedance above 4 Ω.
How do I replace a blown driver?
Disconnect the speaker from power. Remove the grille by unscrewing the bolts. Unplug the faulty driver from the internal crossover, remove mounting screws, and replace with an exact Turbosound replacement part. Reassemble in reverse.
What type of cable should I use?
Use a 2-conductor heavy-duty speaker cable with speakON connectors. For runs up to 30 m, use 12 AWG (4 mm²) wire. For longer runs, use 10 AWG (6 mm²).
Is the TFA-600HW compatible with subwoofers?
Yes, it pairs well with Turbosound subwoofers like the TSW-218 or TSW-118. Use an active crossover at around 100-120 Hz for optimal integration.
How do I clean the speaker grille?
Remove the grille and vacuum the foam backing gently. Wipe the metal with a damp cloth. Do not use solvents or abrasive cleaners. Allow to dry completely before reattaching.
What is the warranty period?
Turbosound typically offers a 5-year warranty for passive speakers. Check with your dealer for specific terms. The warranty covers manufacturing defects but not damage from misuse.
Can I use the TFA-600HW as a floor monitor?
Yes, it has a 60° x 40° rotatable horn. Rotate the horn for horizontal coverage when used as a stage wedge. Ensure the monitor angle is stable to prevent tipping.
User questions about TFA-600HW Turbosound
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual TFA-600HW - Turbosound and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TFA-600HW by Turbosound.