CMEF901 - Drill Craftsman - Free user manual and instructions
Find the device manual for free CMEF901 Craftsman in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Corded Electric Drill |
| Brand | Craftsman |
| Model | CMEF901 |
| Power Supply | 120 V ~ 60 Hz, 6.5 A |
| No-Load Speed | 0-2500 rpm (variable) |
| Drilling Capacity | Wood: 25 mm, Metal: 10 mm, Concrete: 12 mm |
| Chuck | Keyless, 1.5-13 mm |
| Reverse Switch | Yes, for screwing and unscrewing |
| Speed Control | Electronic trigger |
| Dimensions (L x W x H) | 280 x 65 x 180 mm |
| Weight | 1.6 kg |
| Power Cord | 2.5 m |
| Main Functions | Drilling, screwing, hammer drilling (concrete) |
| Maintenance and Cleaning | Unplug before cleaning; blow out ventilation openings; clean the chuck with a dry cloth |
| Safety | Lock-off trigger, protective cover, double insulation sheathing |
| Spare Parts and Repairability | Motor brushes available; chuck and switch replaceable |
| General Information | Limited 2-year warranty; partially manufactured in China |
Frequently Asked Questions - CMEF901 Craftsman
How to change the drill bit on the Craftsman CMEF901 drill?
Unplug the tool. Open the keyless chuck by turning the ring counterclockwise. Insert the bit and tighten firmly by turning clockwise. Check that the bit is centered.
The drill does not start, what to do?
Check that the wall outlet is powered. Check the circuit fuse. Inspect the power cord for any damage. Check the position of the lock-off switch. If the problem persists, contact customer service.
What speed to use for drilling wood?
Use high speed (1500-2500 rpm) for wood. Always start with a pilot hole if the diameter is over 6 mm. Adjust the trigger to control the feed.
How to use the hammer mode?
To drill into concrete or masonry, turn the mode selector to the 'hammer' position (hammer symbol). Use a carbide-tipped bit. Apply moderate and constant pressure.
The drill overheats abnormally, is that normal?
Slight warming is normal during extended use. If it becomes too hot to the touch, stop and let it cool. Clean the ventilation openings. Avoid jamming the bit by force.
Can I use the drill for screwing?
Yes, the drill has a screwing function. Use low speed (0-800 rpm) and a suitable bit. Activate the reverse to unscrew. Do not force too much to avoid damaging the screw head.
How to replace the motor brushes?
Unplug the tool. Locate the brush caps on the side of the motor. Unscrew them with a screwdriver. Remove the old brushes and insert new ones (same size). Screw the caps back on. Put back into service.
Which drill bit to use for drilling metal?
Use an HSS (high-speed steel) metal drill bit. Drill at medium speed (800-1200 rpm). Apply lubricant (cutting oil) to reduce heat. Maintain firm pressure.
The drill has a burning smell, what should I do?
Immediately stop the tool and unplug it. The smell may come from worn brushes or an overheated winding. Let it cool and check the brushes. If the smell persists, consult a professional.
Where to find the complete user manual?
The complete manual in PDF format is available at notice-facile.com. You can download it for free in French. It contains safety recommendations, maintenance, and exploded diagrams.
User questions about CMEF901 Craftsman
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual CMEF901 - Craftsman and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CMEF901 by Craftsman.
USER MANUAL CMEF901 Craftsman
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Craftsman
Model : CMEF901
Category : Drill