N286-01G-SX-A - Network card Tripp Lite - Free user manual and instructions
Find the device manual for free N286-01G-SX-A Tripp Lite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 1 Gigabit SFP Transceiver Module |
| Brand | Tripp Lite |
| Model | N286-01G-SX-A |
| Technology | Multimode Fiber Optic |
| Data Rate | 1 Gbps |
| Connector | LC duplex |
| Wavelength | 850 nm |
| Maximum Distance | 550 m (with OM2 fiber) |
| Supply Voltage | 3.3 V |
| Power Consumption | < 1 W |
| Operating Temperature | 0 °C to 70 °C |
| Dimensions (L x W x H) | 70 x 20 x 10 mm |
| Weight | 30 g |
| Certification | IEEE 802.3z, RoHS |
| Warranty | Limited Lifetime Warranty |
| Compatibility | Network equipment with SFP port |
| Maintenance | Clean optical connectors with appropriate kit |
| Safety | Class 1 Laser (safe) |
| Repairability | No user-serviceable parts, replace the module |
Frequently Asked Questions - N286-01G-SX-A Tripp Lite
What types of cables can I use with the N286-01G-SX-A SFP module?
This module is designed for multimode fiber optic with LC connectors. Use duplex 50/125 µm or 62.5/125 µm cables. Maximum distance is 550 meters with OM2 fiber.
Is the module compatible with any switch or router?
The N286-01G-SX-A is compatible with any network equipment that has a standard SFP port complying with the MSA (Multi-Source Agreement) specification. However, some manufacturers may require certified modules. Check compatibility with your equipment manufacturer.
What is the power consumption of this module?
Power consumption is less than 1 watt, making it very energy efficient.
How to properly install the SFP module?
Gently insert the module into the SFP port until it clicks. Make sure the latch is locked. Do not force insertion. To remove, lower the latch and pull gently.
What to do if the module is not detected?
Check that the module is properly inserted and locked. Ensure the equipment supports generic SFP modules. If the problem persists, try cleaning the optical connectors with a suitable cleaning kit.
Does this module support hot-plug?
Yes, SFP modules are designed to be inserted or removed without powering off the equipment. However, it is recommended to disconnect the fiber cable before removing the module.
What is the wavelength used for transmission?
This module uses a wavelength of 850 nm, typical for short-range multimode links.
Is the module delivered with a cable?
No, the module is sold alone. You need to have a fiber optic cable with LC connectors to use it.
How to clean optical connectors?
Use a specific fiber optic cleaning kit (lint-free sticks, cleaning solution). Gently clean the connector ferrules and the module port. Avoid any contact with fingers.
What is the warranty of this product?
Tripp Lite offers a limited lifetime warranty on this module. In case of defect, contact Tripp Lite technical support for replacement.
User questions about N286-01G-SX-A Tripp Lite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network card in PDF format for free! Find your manual N286-01G-SX-A - Tripp Lite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. N286-01G-SX-A by Tripp Lite.
USER MANUAL N286-01G-SX-A Tripp Lite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Tripp Lite
Model : N286-01G-SX-A
Category : Network card