APS1250 - Battery Tripp Lite - Free user manual and instructions
Find the device manual for free APS1250 Tripp Lite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Inverter/Battery Charger with Automatic Transfer |
| Rated Power | 1250 VA (volt-amps) |
| Continuous Output Power | 1000 W (watts) |
| Input Voltage | 12 V DC (lead-acid battery) |
| Output Voltage | 120 V AC, 60 Hz, Modified Sine Wave |
| Number of Output Outlets | 2 NEMA 5-15R Outlets |
| Battery Charge Current | 40 A (amps) |
| Dimensions (L × W × H) | 44.5 × 21.6 × 25.4 cm |
| Weight | 12.7 kg |
| Power Source | External 12 V battery (not included) or AC mains via built-in charger |
| Main Functions | DC-AC conversion, intelligent battery charger, automatic transfer during power outage |
| Protections | Overload, overheat, short circuit, battery under-voltage, output over-voltage |
| Display | Status LEDs (AC mains, inverter, fault) |
| Cooling | Thermostatically controlled variable speed fan |
| Operating Temperature | 0 °C to 40 °C |
| Maintenance and Cleaning | Dust ventilation grilles with a dry cloth; check battery connections periodically |
| Safety | Use a properly sized battery; do not expose to water or moisture; install in a ventilated area |
| Spare Parts and Repairability | Replaceable internal fuses; replaceable fan; easily interchangeable external battery |
| General Information | Brand: Tripp Lite; Model: APS1250; Category: Battery (inverter/charger) |
Frequently Asked Questions - APS1250 Tripp Lite
What battery should I use with the Tripp Lite APS1250?
Use a 12 V lead-acid battery (AGM or flooded) with a capacity of at least 100 Ah. The recommended capacity is 200 Ah for optimal runtime.
How long can the APS1250 run a 500 W device?
With a 200 Ah battery, runtime is approximately 3 to 4 hours, assuming 80% efficiency and 50% depth of discharge.
Can I plug the APS1250 into AC mains and a battery at the same time?
Yes, the APS1250 has automatic transfer: it goes into charger mode when AC mains is present and instantly switches to battery during a power outage.
How do I clean the APS1250?
Unplug the device and use a dry cloth to remove dust from ventilation grilles. Do not use water or chemicals.
What should I do if the APS1250 emits a continuous beep?
A continuous beep indicates an overload or discharged battery. Reduce the connected load or recharge the battery. Also check the connections.
Does the APS1250 produce a pure sine wave?
No, it produces a modified sine wave, compatible with most devices, but some sensitive equipment (like clocks) may not function properly.
Can I use the APS1250 to power a refrigerator?
Yes, as long as the refrigerator's starting power does not exceed 1000 W. Check the starting power (usually 2 to 3 times the rated power).
How do I replace the internal fuse of the APS1250?
Unplug the device, open the cover (screws), remove the blown fuse and replace it with a fuse of the same type and rating. Refer to the manual for exact specifications.
Is the APS1250 compatible with solar panels?
Not directly; the APS1250 requires a 12 V battery and can be used with a solar charge controller to charge the battery, but it does not accept direct solar input.
What is the warranty for the Tripp Lite APS1250?
Tripp Lite generally offers a 2-year warranty for this model. Check the official website or your dealer for exact terms.
User questions about APS1250 Tripp Lite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Battery in PDF format for free! Find your manual APS1250 - Tripp Lite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. APS1250 by Tripp Lite.
USER MANUAL APS1250 Tripp Lite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Tripp Lite
Model : APS1250
Category : Battery