UR630 - Alarm clock radio Soundmaster - Free user manual and instructions
Find the device manual for free UR630 Soundmaster in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Clock radio |
| Brand | Soundmaster |
| Model | UR630 |
| Dimensions (W x H x D) | 15 x 10 x 5 cm |
| Weight | 0.3 kg |
| Power supply | 230 V ~ 50 Hz, mains |
| Backup battery | CR2032 (included) |
| Radio functions | FM / AM, auto scan, 20 presets |
| Alarm functions | Dual alarm, snooze, radio or buzzer wake-up |
| Display | Red LED, adjustable brightness |
| Night light | Yes, with dimming |
| Care and cleaning | Soft dry cloth, do not use abrasive products |
| Safety | Do not expose to water, unplug before cleaning |
| Spare parts and repairability | CR2032 battery available, other parts via after-sales service |
| General information | Compact clock radio, ideal for bedside |
Frequently Asked Questions - UR630 Soundmaster
How to set the time on the Soundmaster UR630?
Press and hold the CLOCK button for 3 seconds, then use the + and - buttons to adjust the hours. Press CLOCK again to set the minutes, then confirm.
How to set the alarm?
Press and hold ALARM 1 or ALARM 2 for 3 seconds. Use the + and - buttons to set the alarm time. Choose the wake-up mode (radio or buzzer) with SOURCE, then confirm with ALARM.
How to activate the snooze function?
When the alarm sounds, press the SNOOZE button on top of the unit. The alarm will repeat every 9 minutes.
How to adjust the display brightness?
Press the DIMMER button repeatedly to cycle through brightness levels: high, medium, low.
How to save a radio station as a preset?
Tune to the desired station, then press MEM. Use the number buttons (1-20) to choose a location, then press MEM again to confirm.
What to do if the alarm does not ring in the morning?
Check that the alarm is enabled (bell icon displayed) and that the volume is not at zero. Make sure the alarm time is correct. Replace the backup battery if the time was lost after a power outage.
How to replace the backup battery?
Open the compartment on the back of the unit, remove the old battery (CR2032) and insert a new one observing polarity (+ facing up). Close the compartment.
Why is the display flashing?
A flashing display indicates that the time is not set or the backup battery is failing. Set the time as described in question 1 or replace the battery.
How to switch between 12h and 24h time?
Press and hold CLOCK for 3 seconds, then press MEM to toggle between 12h and 24h. Confirm with CLOCK.
Cleaning the device: what should I avoid?
Use a soft dry cloth. Never use chemicals, alcohol, or abrasives. Do not let liquid enter the device and unplug it before cleaning.
User questions about UR630 Soundmaster
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Alarm clock radio in PDF format for free! Find your manual UR630 - Soundmaster and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UR630 by Soundmaster.
USER MANUAL UR630 Soundmaster
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Soundmaster
Model : UR630
Category : Alarm clock radio