UR2010 - Alarm Clock Soundmaster - Free user manual and instructions

Product Type	Alarm Clock Radio
Brand	Soundmaster
Model	UR2010
Dimensions (Approx.)	150 x 80 x 80 mm
Weight (Approx.)	0.3 kg
Power Supply	AC 230V, 50Hz
Backup Battery	3V (2 x 1.5V UM-4/AAA)
Radio Frequency Range	FM 87.5 - 108 MHz
Output Power	500 mW
Alarm Types	Beep or Radio, Dual Alarms (AL1, AL2)
Special Date Alarm (SDA)	Yes, settable annually or once
Cooking Timer	1 min to 23h59
Radio Presets	10 stations
RDS Function	Yes, displays station name and time sync
Auto Clock Update	Via RDS
Display Dimmer	Adjustable (ON/OFF)
Key Lock	Yes
Temperature Display	5°C – 40°C
Care & Cleaning	Wipe with a soft, dry cloth. Do not use liquids or abrasive cleaners.
Safety	Do not open the device. Risk of electric shock. Use only specified batteries.
Spare Parts & Repairability	No user-serviceable parts. Contact manufacturer for service.
General Information	Copyright Wörlein GmbH. Manual available online.

Frequently Asked Questions - UR2010 Soundmaster

How do I set the alarm?

Press AL1 or AL2 once. Use + / - to adjust time, then MODE to select alarm type (Daily, Weekday, Weekend). Press same alarm key again to choose output (Beep or Radio). Wait 10 seconds to save.

How do I set the clock manually?

Press MODE once in clock display mode. Use + / - to change minutes. Press MODE again to set date. Wait 10 seconds to confirm.

What is SDA and how do I use it?

SDA stands for Special Date Alarm. It triggers an alarm at a specific date (e.g., birthday). Set it after setting the date: press MODE until SDA flashes, use + / - to choose date, then SDA MODE to ignore year for annual repeat.

How does the cooking timer work?

Press TIMER to enter timer mode. Use MEM keys to select memory, + / - to set duration (1 min to 23h59). Press TIMER again to start. Press again to pause, hold 2 sec to cancel.

How do I store and recall radio presets?

Tune to a station, then press MEM briefly. Select a preset slot (1-10) using MEM or +/-, then press MEM again to store. To recall, press MEM when radio is on.

Can I use the radio as an alarm?

Yes. While setting an alarm, press the alarm key repeatedly until 'Radio' appears. The radio will play for 60 minutes when the alarm triggers.

How do I set the date?

From clock display, press MODE once. The date will flash. Use + / - to change day, month, year. Press MODE again to confirm and proceed to SDA.

Why is my alarm not sounding?

Check that the alarm is enabled (AL1 or AL2 shown). Ensure the alarm time is set correctly and the output type is selected (Bell icon for beep or Radio icon). Also check the volume if radio alarm is selected.

How does the key lock work?

Hold SNOOZE for 2 seconds until 'KEY' appears on display. This locks all buttons. Repeat to unlock.

How do I adjust the display brightness?

Enter clock setting mode and navigate to 'DIM ON/OFF' using MODE. Press + / - to switch dimmer on (illuminates for 10 seconds after key press) or off (always on).

USER MANUAL UR2010 Soundmaster

Diagram of a device with two panels and a control panel, showing internal components and alignment arrows (no text or symbols)

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

WARNING: SHOCK HAZARD - DO NOT OPEN

AVIS: RISQUE DE CHOC ÉLECTRONIQUE - NE PAS OUVRIR

• As the unit is powered up, the date and clock are defaulted to Monday, 1 ^st Jan 2007, 0:00 or 12:00AM.
  • The two alarms are defaulted to 0:00 or 12:00AM, daily type but disabled.
  • The radio is switched off.
• It then switches to auto-run mode.

Auto-run Mode (Radio OFF)

graph TD
    A["Press <MODE> once to go to different mode sequentially."] --> B["Auto-run Mode"]
    B --> C["Set the Clock"]
    C --> D["Set the Date"]
    D --> E["Set the SDA"]
    E --> F["Automatic update ON/OFF"]
    F --> G["Dimmer ON/OFF"]
    G --> H["Clock display"]

• In radio mode, If RDS information is transmitted by the station, the station name appears in place of the frequency; the frequency is displayed when there is no RDS information had been received.
• Press to review/set the alarm-1.
• Press to review/set the alarm-2.
• Only when the radio is ON, press , , and , to recall the preset memories.
• Only when the radio is ON, press ,and then again to store the current station into memory.
• Only when the radio is ON, press and to adjust speaker volume.
• When the radio is ON, press to preview those preset memory. Press and hold for 2 seconds to activated the AMS (Automatic Memory Storage).
• At every minute boundary, the real time clock is compared with the alarm setting if it has been enabled. For details, please refer to the section of 'When alarm is active'.

Set the clock (manually)

• Press once when the unit stays in clock display mode.
• The clock goes flashing the LCD with day-flag cleared.
• The second keeps counting up once per second.
• Press to advance the clock by 1 minute.
• Press to move the clock back by 1 minute
• Press and hold or to set the clock in fast mode of 10 minutes per step.
• Press once to set the date.
• Press other key to start its corresponding function.
• When no key has been pressed for 10 seconds, the current setting is confirmed and it switches to auto-run mode.

Set the date

• Press once in clock setting mode.
  • The current date goes flashing in the format of dd.mm.yyyy in the LCD.
• Press or to change the current setting by 1 day per step. Press and hold or to change the setting in fast mode of 10 days per step. The day flag will be updated automatically when the date has become

steady.

• Press once to confirm the current setting and it switches to set the SDA.
• Press other key to start its corresponding function.
• When no key has been pressed for 10 seconds, the current setting is confirmed and it switches to auto-run mode automatically.

Set the SDA

• Press once in date setting mode.
• The date & 'SDA' goes flashing alternative.
• Press or to set the Special Date.
• Press < SDA MODE > to ignore the year.
• Press once to confirm the current setting and go to set the automatic update ON/OFF.
• Press to select the number of SDA
• Press other key to start its corresponding function.
• When no key has been pressed for 10 seconds, the current setting is confirmed and it switches to auto-run mode automatically.
  In case of ignore the year the SDA will be active ever year at same date

Switching automatic update ON/OFF

• Press once in SDA setting mode.
• The display show 'UPDATE' press or to switch update ON or OFF.
• The indicator “ ⏻ ” disappears, the update function is switch OFF.
• The indicator “received.” flashes. The time will be updated the next RDS time signal is
• Press once to confirm the current setting and go to set the dimmer ON/OFF.
• Press other key to start its corresponding function.
• When no key has been pressed for 10 seconds, the current setting is confirmed and it switches to auto-run mode automatically.

Switching dimmer ON/OFF

• Press once in the automatic update setting mode.
• The display show 'DIM ON' or 'DIM OFF'.
• Press or to switch dimmer ON or OFF.
• Display show 'DIM ON' the display is illuminated for 10 seconds, when any key had been pressed.
  • Display show 'DIM OFF' the display is illuminated for all time.
• Press once to confirm the current setting and it switches to auto-run mode.
• Press other key to start its corresponding function.
• When no key has been pressed for 10 seconds, the current setting is confirmed and it switches to auto-run mode automatically.

The Cooking Timer (Radio Off)

• Press to enter the timer mode.

• Press once, display shows '00:00 T1' goes solid or the previous value of the memory-1 goes solid in the LCD.

• Similar to , press , , or to select the desired preset memory value.

• Press or to adjust the value (from 1 minute to 23 hours and 59 minute), press to start the cooking timer and the current value will store in to memory automatically.
• Press again to pause the timer. To restart the timer press again.
• Press and hold for 2 seconds to terminate the timer and leave, when the timer is running.
• When the clock before 30 second reach to 00.00, the voice "be...be...be...be...be" will be heard until 00.00
• When the clock reach to 00:00, the voice "be----" will be heard for 1 hour until user terminate.
• Press the < TIMER > to terminate the timer and leave.
  As the alarm becomes active, the cooking timer, if exists, is terminated immediately.

ALARM1 and ALARM2 setting

• Press or once, 'ALARM1' or 'ALARM2' goes solid in the alphanumeric section.
• The current setting of HH:MM and the type of alarm goes flashing by the corresponding day-flags.
• Press to advance the setting by 1 minute.
• Press to move the setting back by 1 minute.
• Press and hold or to change the setting in fast mode of 10 minutes per step.
• Press to change the type of alarm between daily, weekday, weekend and daily independently, which are reflected by the 7 day-flags.
• Press and hold to enter daily independently mode. Press again to select the day and it will reflect by the day-flags. Press and hold to leave the daily independently mode and return select daily, weekday and weekend.
• Press same alarm key, which is or , once to select the output format of the alarm

Output format LCD display
Beep sound ‘Bell’	symbol goes solid
Radio output ‘Radio’ symbol goes solid
Disable All the ‘Bell’ and ‘Radio’ are cleared

- Press other key to start its corresponding function.

- When no key has been pressed for 10 seconds, the system goes back to auto-run mode.

When SDA is active

• When the date/month/(year) matches with the SDA which has been enable, alert becomes active at 8:00AM.
• As the SDA active, Sound of beep toggles at the Speaker for 10 minutes, Muted Radio even radio ON & The "SDA" goes flash on LCD display.
  • The 10 minutes beep music per every hour until 23:00.
• Press any key to start its corresponding function and the SDA at the day will be terminate.

When alarm is active

• When the real time clock matches with the alarm which has been enabled, alarm becomes active.
• As the alarm becomes active, the Cooking timer, if exists, is terminated immediately.
• If Beep sound alarm is selected,
  1) Sound of beep toggles at the Speaker
  2) Muted Radio even radio ON
  3) The duration of alarm is 10 minutes

• If Radio alarm is selected,

1) RADIO ON

2) the duration of the alarm is 60 minutes

- To terminate the currently active alarm, press the corresponding key or .

Radio reception

• Press once, the station frequency or the station name show on LCD.
• If RDS information is transmitted by the station current set, “DDR·D·S” appears in the display and after short time the station name appears in place of the frequency.

Recall radio preset memory

• There are 10 preset memory stations for the radio.
- When the radio is ON, press once. 'MEM' goes solid; the frequency of the memory-1 goes solid in the LCD. Press again to select the preset memory-6.
- Similar to , press , , or to select the desired preset memory station.
- When new preset memory key is pressed, MUTE is active. When keying the preset memory has been released for 1 second, the selection of preset memory is considered as valid and the radio will be tuned to that frequency immediately with MUTE idle.
- At any time, press other key to start its corresponding function.

Store into memory

• To store the tuning frequency of radio station being received into any of the preset memory, press once. The 'MEM' goes flashing.
• Select the desired memory station by pressing the corresponding key until its number goes solid above 'MEM'.
• Press again to confirm the process of storing. Then, 'MEM' goes solid.
• When 'MEM' is flashing, pressing , or will search up, search down and memory scan with the 'MEM' cleared.
• Press other key to start its corresponding function.

Search Up/Down

• When the radio is ON, press once to change the receiving frequency up by 1 step (50kHz).
• Press once to change the receiving frequency down by 1 step (50kHz).
• Press and hold to search the next radio station by moving the receiving frequency up.

- Press and hold to search the next radio station by moving the receiving frequency down.

Memory review

• When the radio is ON, press once to scan the 10 preset memory stations.
• The review starts from the next memory station or MEM-1 if no memory station is being selected.
• Review will stop at each station for 5 seconds.
• During review, press other key will start its corresponding function and the review process will be terminated.

AMS Using

- Press and hold 2 seconds to active AMS mode. In this mode, the radio will automatically store the station that had been scanned.

Electronic Volume Control

• Only when radio is on,
• Press once, to increase speaker volume by one step. Hold for continually.
• Press once, to decrease speaker volume by one step. Hold for continually.

Key-lock

- Press and hold the for 2 seconds, key-lock has been switched ON, the "KEY" goes solid.

Technical Data

UKW-FM Frequency	87,5 – 108MHz
Rated Voltage	AC	230V	50Hz
Backup Battery	3V (2 x 1,5V UM-4/AAA)
Output	500mW
Temperature display	5°C – 40°C

Copyrights by Wörlein GmbH, 90556 Cadolzburg, Germany.