Omnitronic

STR-1000 - Microphone Omnitronic - Free user manual and instructions

Find the device manual for free STR-1000 Omnitronic in PDF.

📄 20 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Omnitronic STR-1000 - page 12
View the manual : Deutsch DE English EN
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeDynamic microphone (cardioid)
Dimensions (L x dia.)180 mm x 50 mm
Weight300 g
Power SupplyPassive (no battery required)
Polar PatternCardioid
Frequency Response50 Hz - 15 kHz
Impedance600 ohms
Sensitivity-54 dBV/Pa
ConnectorXLR 3-pin (male)
ColorBlack
MaterialMetal body with steel grille
SwitchOn/Off slide switch
Cable IncludedYes, XLR to 1/4" (6.35 mm) cable
Stand AdapterIncluded (5/8" to 3/8" thread)
MaintenanceClean with a soft, dry cloth; avoid moisture
SafetyKeep away from liquids; do not disassemble
Spare Parts AvailableReplacement grille, XLR connector, switch
RepairabilityModular design; parts can be replaced by a technician
Warranty2 years (depending on region)
BrandOmnitronic
ModelSTR-1000

Frequently Asked Questions - STR-1000 Omnitronic

What type of microphone is the Omnitronic STR-1000?
The STR-1000 is a dynamic microphone with a cardioid pickup pattern, ideal for vocal applications.
Does the STR-1000 require a battery?
No, it is a passive dynamic microphone and does not need any power source.
What connector does the STR-1000 use?
It uses a standard XLR 3-pin male connector, compatible with most PA systems and audio interfaces.
Can I use the STR-1000 with a computer?
Yes, with an appropriate audio interface or adapter that converts XLR to USB or 3.5mm.
What is the frequency response of the STR-1000?
The frequency response is 50 Hz - 15 kHz, suitable for vocals and speech.
How do I clean the microphone?
Use a soft, dry cloth to wipe the exterior. Do not use liquids or abrasive cleaners.
Is the microphone shock mount included?
No, but it comes with a stand adapter. A separate shock mount can be purchased.
What is the polarity of the output?
The output is balanced on XLR pin 2 positive, pin 3 negative.
Can I use the STR-1000 for instruments?
Yes, it can be used for loud instruments like guitar amps and drums, but it is primarily designed for vocals.
What spare parts are available for the STR-1000?
Replacement grilles, XLR connectors, and switches are commonly available from Omnitronic or third-party suppliers.

User questions about STR-1000 Omnitronic

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Microphone in PDF format for free! Find your manual STR-1000 - Omnitronic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. STR-1000 by Omnitronic.

USER MANUAL STR-1000 Omnitronic

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Omnitronic

Model : STR-1000

Category : Microphone