E 523 - Microphone Omnitronic - Free user manual and instructions
Find the device manual for free E 523 Omnitronic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dynamic Vocal Microphone |
| Brand | Omnitronic |
| Model | E 523 |
| Polar Pattern | Cardioid |
| Frequency Response | 50 Hz – 15 kHz |
| Impedance | 600 Ω |
| Sensitivity | -54 dBV/Pa |
| Connector | 3-pin XLR |
| Power Supply | Passive (no battery required) |
| Dimensions | 180 mm x 50 mm (length x diameter) |
| Weight | 300 g |
| Housing Material | Zinc die-cast with matte finish |
| On/Off Switch | Yes (slide switch) |
| Included Accessories | Microphone clip, pouch, and user manual |
| Application | Live vocals, speech, PA systems |
| Cleaning | Wipe with a dry cloth; avoid liquids |
| Storage Conditions | Dry environment, temperature 0°C to 40°C |
| Safety Note | Keep away from moisture and extreme heat |
| Repairability | Replaceable grille and capsule (service center) |
| Certifications | CE, RoHS |
Frequently Asked Questions - E 523 Omnitronic
What type of microphone is the Omnitronic E 523?
The Omnitronic E 523 is a dynamic vocal microphone with a cardioid polar pattern, ideal for live performances and speech.
Does the E 523 require a battery or phantom power?
No, the E 523 is a passive dynamic microphone and does not need any external power source. Simply connect it via XLR to a mixer or amplifier.
What is the frequency response of the E 523?
The frequency response is 50 Hz to 15 kHz, tailored for clear vocal reproduction with a slight presence boost.
Can I use the E 523 for recording instruments?
While designed for vocals, it can also be used for miking instruments like guitar amps or snare drums, although its response is not flat.
What cable connector does the microphone use?
It uses a standard 3-pin XLR connector. You will need an XLR cable to connect to a mixer or audio interface.
How do I clean the Omnitronic E 523?
Clean the grille and body with a soft, dry cloth. For the grille, you can unscrew it and wash it with mild soap and water, but dry thoroughly before reassembly. Avoid getting moisture inside the microphone.
Is the E 523 compatible with wireless systems?
No, the E 523 is a wired microphone. For wireless use, you would need a separate wireless XLR transmitter and receiver.
Why is there no sound from the microphone?
Check that the XLR cable is fully inserted into both the microphone and the mixer. Ensure the mixer channel is unmuted and the gain is turned up. Also verify the microphone's on/off switch is set to ON.
What is the warranty period for the E 523?
Omnitronic typically offers a 2-year warranty from the date of purchase. Keep your receipt for service.
Can I replace the microphone grille or capsule?
Yes, the grille is removable and can be replaced. For capsule replacement, contact an authorized service center to ensure proper alignment and performance.
User questions about E 523 Omnitronic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Microphone in PDF format for free! Find your manual E 523 - Omnitronic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. E 523 by Omnitronic.
USER MANUAL E 523 Omnitronic
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Omnitronic
Model : E 523
Category : Microphone