Jump Starter 16.0 - Battery charger ANSMANN - Free user manual and instructions
Find the device manual for free Jump Starter 16.0 ANSMANN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Portable battery jump starter |
| Brand | ANSMANN |
| Model | Jump Starter 16.0 |
| Integrated battery capacity | 16.0 Ah (Lithium-ion) |
| Power source | Rechargeable lithium-ion battery via AC adapter or cigarette lighter |
| Main functions | Vehicle jump start (12V), USB charger for mobile devices, integrated LED flashlight |
| Peak starting current | Approximately 400 A (estimated) |
| Output ports | 1 USB port (5V/2.1A), 1 cigarette lighter socket (12V/10A) |
| Dimensions | Approximately 200 x 100 x 50 mm (estimated) |
| Weight | Approximately 500 g (estimated) |
| Maintenance and cleaning | Clean with a soft, dry cloth; do not use abrasive products |
| Safety | Protection against reverse polarity, short circuits, overcharges, and deep discharges |
| Spare parts and repairability | Parts not available separately; repair by a certified professional |
| General information | Outdoor use recommended; store in a dry, temperate place |
Frequently Asked Questions - Jump Starter 16.0 ANSMANN
How do I recharge the Jump Starter 16.0?
Use the supplied AC adapter or the cigarette lighter cable to recharge the internal battery. Plug the device into a mains socket (220V) or into a running vehicle's cigarette lighter. Full charging takes about 4 to 6 hours.
Can you start a car with a completely dead battery?
Yes, the Jump Starter 16.0 is designed to start 12V vehicles even if the battery is fully discharged. Make sure the jump starter is sufficiently charged.
How do I use the Jump Starter to start a vehicle?
Connect the red clip (positive) and black clip (negative) to the corresponding terminals of the vehicle battery. Turn on the jump starter then start the engine. After starting, disconnect the clips in reverse order.
How long does it take to charge a smartphone?
The USB port delivers 5V/2.1A, which can charge a typical 3000 mAh smartphone in about 1.5 to 2 hours.
Is the Jump Starter protected against connection errors?
Yes, it has protection against reverse polarity. If you connect the clips incorrectly, an audible or visual signal will warn you and no current will flow.
Can I use the Jump Starter while it is charging?
No, it is not recommended to use the jump start or USB charging functions while the device is charging. Wait until charging is complete.
How do I maintain the internal battery?
Recharge the battery at least every 3 months if not in use. Do not let the battery fully discharge for long periods. Store it in a dry place at room temperature.
What is the power of the LED light?
The integrated LED light provides a powerful illumination (about 50 lumens) with multiple modes: on, flashing, and SOS.
Can the Jump Starter power a 12V device like a compressor?
Yes, via the 12V/10A cigarette lighter socket, you can connect accessories such as a compressor, portable refrigerator, etc., as long as the power does not exceed 120W.
What should I do if the Jump Starter does not start my vehicle?
Check the device's charge (the indicator should be green). Make sure the clips are properly connected and that the protection is not activated. If the problem persists, the jump starter battery may be defective.
User questions about Jump Starter 16.0 ANSMANN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Battery charger in PDF format for free! Find your manual Jump Starter 16.0 - ANSMANN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Jump Starter 16.0 by ANSMANN.
USER MANUAL Jump Starter 16.0 ANSMANN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ANSMANN
Model : Jump Starter 16.0
Category : Battery charger