N286-01G-SX-J - Uncategorized Tripp Lite - Free user manual and instructions
Find the device manual for free N286-01G-SX-J Tripp Lite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Transceiver SFP Gigabit Ethernet |
| Brand | Tripp Lite |
| Model | N286-01G-SX-J |
| Category | Optical Transceiver |
| Fiber Type | Multimode |
| Data Rate | 1 Gbps (1000Base-SX) |
| Interface | LC duplex |
| Maximum Distance | 550 meters |
| Wavelength | 850 nm |
| Power Supply | 3.3 V DC |
| Power Consumption | Less than 1 W |
| Dimensions (L x W x H) | 13.4 x 8.5 x 8.5 mm |
| Weight | 20 g |
| Operating Temperature | 0 °C to 70 °C |
| Operating Humidity | 5% to 95% (non-condensing) |
| Compliance | IEEE 802.3z, MSA SFP |
| Main Functions | Conversion of electrical signals to optical signals and vice versa for Gigabit Ethernet transmission over multimode fiber |
| Maintenance and Cleaning | Clean the optical connectors with a fiber optic cleaning kit. Do not use harsh solvents. |
| Safety | Do not stare directly into the laser beam. Laser class 1. Disconnect before handling. |
| Spare Parts and Repairability | No repairable parts. In case of failure, replace the entire unit. |
| General Information | Compatible with switches and routers equipped with SFP ports. Hot-plug capable. |
Frequently Asked Questions - N286-01G-SX-J Tripp Lite
What type of fiber does this Tripp Lite N286-01G-SX-J transceiver support?
This transceiver is designed for multimode fiber with a LC duplex connector.
What is the maximum distance supported by the N286-01G-SX-J?
The maximum distance is 550 meters for 50 or 62.5 µm multimode fiber.
Is this SFP module compatible with any network equipment?
It is compatible with most equipment compliant with MSA SFP and IEEE 802.3z standards. Check compatibility with your equipment manufacturer.
How to install the N286-01G-SX-J transceiver?
Carefully insert the module into the SFP port of your equipment until it clicks. Connect the fiber cable to the LC connector. The module is hot-plug.
What to do if the network link does not establish?
Check that the fiber is properly connected, the connectors are clean, and the equipment supports 1000Base-SX mode. Try another port or another cable.
Does the module heat up during operation?
Slight heat is normal. The metal casing dissipates heat. Ensure the module is well ventilated.
Can I use this transceiver with single-mode fiber?
No, the N286-01G-SX-J is intended only for multimode fiber. For single-mode fiber, use a suitable model (e.g., 1000Base-LX).
How to clean the optical connectors?
Use a fiber optic cleaning kit with lint-free wipes and isopropyl alcohol. Avoid touching the fiber ends.
What is the warranty of this product?
Tripp Lite typically offers a limited warranty. Refer to the manual or the manufacturer's website for exact details.
Where can I download the complete manual?
You can download the manual in PDF format from our site notice-facile.com by clicking the 'Download' button.
User questions about N286-01G-SX-J Tripp Lite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual N286-01G-SX-J - Tripp Lite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. N286-01G-SX-J by Tripp Lite.
USER MANUAL N286-01G-SX-J Tripp Lite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Tripp Lite
Model : N286-01G-SX-J
Category : Uncategorized