N286-01G-SX-G - Uncategorized Tripp Lite - Free user manual and instructions
Find the device manual for free N286-01G-SX-G Tripp Lite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Gigabit Ethernet Media Converter (1000BASE-SX) |
| Connectors | 1x SC duplex multimode (fiber) + 1x RJ-45 (copper) |
| Transmission Distance | Up to 550 meters on multimode fiber 62.5/125µm |
| Data Rate | 1 Gbps (1000 Mbit/s) |
| Optical Wavelength | 850 nm |
| Power Supply | External adapter 5V DC, 2A (included) |
| Power Consumption | ~5 W maximum |
| Dimensions (L x W x H) | 94 x 70 x 26 mm |
| Weight | ~200 g |
| LED Indicators | Power, Link/Activity (fiber and copper) |
| Mounting Support | Flat surface or DIN rail mounting (optional) |
| Operating Temperature | 0°C to 50°C |
| Operating Humidity | 10% to 90% (non-condensing) |
| Standards Compliance | IEEE 802.3z 1000BASE-SX, IEEE 802.3ab 1000BASE-T |
| Fiber Compatibility | Multimode 62.5/125µm or 50/125µm |
| Maintenance and Cleaning | Clean connectors with a lint-free wipe and isopropyl alcohol |
| Safety | Do not open the case; disconnect before cleaning |
| Spare Parts and Repairability | Replaceable power adapter; no user-serviceable parts inside |
| Warranty | 3-year limited Tripp Lite warranty |
Frequently Asked Questions - N286-01G-SX-G Tripp Lite
How to install the N286-01G-SX-G converter?
Connect the fiber cable to the SC port and the RJ-45 cable to the copper port. Connect the power adapter, then check that the Power and Link LEDs light up.
What is the maximum supported distance?
On multimode fiber 62.5/125µm, the distance reaches 550 meters at 1 Gbps. With 50/125µm fiber, you can also reach 550 m.
Is this converter compatible with 10/100 Mbps equipment?
Yes, it supports auto-negotiation for speeds 10/100/1000 Mbps on the copper port. The fiber port operates only at 1000BASE-SX.
What to do if the Link LED does not light up?
Check connections, cleanliness of fiber connectors, and that the fiber is not damaged. Try swapping the fiber strands in the SC port (Tx/Rx).
Can I use this converter with single-mode fiber?
No, the N286-01G-SX-G is designed only for multimode fiber (850 nm). For single-mode, choose an appropriate model (e.g., N286-01G-LX).
How to clean optical connectors?
Use a lint-free optical wipe moistened with isopropyl alcohol (99%) and dry with a dry wipe. Do not touch the connector surface.
Does the case heat up normally?
Yes, the case may become warm during operation. This is normal. Avoid covering the device to ensure adequate ventilation.
What type of fiber cable is required?
Use a multimode fiber cable with SC duplex connectors of type 62.5/125µm or 50/125µm. The Tx strand of the converter must connect to the Rx of the remote device.
Is the power adapter universal?
Yes, the included adapter supports an input voltage of 100-240 V AC, 50/60 Hz, with an output of 5V DC / 2A. It is compatible with standard wall outlets thanks to a removable plug.
Where to download the complete manual?
The PDF manual is available for free on notice-facile.com in multiple languages. You can also request a translation by email.
User questions about N286-01G-SX-G Tripp Lite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual N286-01G-SX-G - Tripp Lite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. N286-01G-SX-G by Tripp Lite.
USER MANUAL N286-01G-SX-G Tripp Lite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Tripp Lite
Model : N286-01G-SX-G
Category : Uncategorized