CARRIER

06N - Compressor CARRIER - Free user manual and instructions

Find the device manual for free 06N CARRIER in PDF.

📄 6 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice CARRIER 06N - page 1
View the manual : English EN 中文 ZH
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Semi-Hermetic Reciprocating Compressor
Brand Carrier
Model 06N
Application Commercial Refrigeration & Air Conditioning
Refrigerant R-22, R-404A, R-134a (check manual)
Displacement Approx. 45 m³/h (varies by model variant)
Power Supply 400V / 3-phase / 50 Hz
Motor Power 5.5 kW (7.5 HP) typical
Dimensions (LxWxH) 600 x 400 x 450 mm
Weight 85 kg
Oil Charge POE oil, approximately 2.5 liters
Max Operating Pressure 28 bar (high side)
Discharge Temperature Limit 140°C
Maintenance Check oil level, clean condenser coils, inspect electrical connections annually
Safety Devices High-pressure switch, oil pressure switch, internal overload protector
Spare Parts Available Valve plates, gaskets, oil filter, motor windings
Installation Must be mounted on a vibration-absorbing base, electrical wiring per local codes

Frequently Asked Questions - 06N CARRIER

What type of oil does the Carrier 06N compressor require?
The Carrier 06N compressor typically uses POE (Polyolester) oil for compatibility with HFC refrigerants. Always refer to the manual for the exact oil grade and viscosity.
How do I check the oil level in the 06N compressor?
The compressor has a sight glass. With the compressor running steadily, the oil level should be between 1/2 and 3/4 of the sight glass. If low, add oil through the service port.
What refrigerants are compatible with this compressor?
The Carrier 06N is compatible with R-22, R-404A, and R-134a. For other refrigerants, consult the manufacturer's guidelines.
Why is my 06N compressor cycling on and off frequently?
Frequent cycling may be due to low refrigerant charge, a faulty pressure switch, or an oversized system. Check suction and discharge pressures and look for leaks.
What is the recommended maintenance schedule?
Annually: check oil level and condition, clean condenser, inspect electrical connections, and verify safety controls. Replace oil filter if equipped.
How do I replace the oil in the 06N compressor?
Drain oil from the drain plug while the compressor is warm. Refill with recommended oil through the service port. Do not overfill.
What safety devices are installed on this compressor?
The compressor includes a high-pressure cutout, a low oil pressure switch, and an internal motor overload protector. These shut down the compressor in unsafe conditions.
Can I install the compressor outdoors?
Yes, but it must be protected from direct rain and extreme weather. A weatherproof enclosure is recommended.
Where can I find spare parts for the 06N?
Spare parts are available from Carrier authorized distributors. Common parts include valve plates, gaskets, oil filters, and motor windings.
What is the maximum operating pressure of the 06N?
The maximum allowable high-side pressure is 28 bar. Exceeding this can cause safety hazards.

User questions about 06N CARRIER

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Compressor in PDF format for free! Find your manual 06N - CARRIER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 06N by CARRIER.

USER MANUAL 06N CARRIER

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : CARRIER

Model : 06N

Category : Compressor