Flexsys FM12 - Uncategorized DB Technologies - Free user manual and instructions
Find the device manual for free Flexsys FM12 DB Technologies in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Active monitoring speaker |
| Brand | DB Technologies |
| Model | Flexsys FM12 |
| Dimensions (W x H x D) | 400 x 600 x 400 mm |
| Weight | 20 kg |
| Power supply | Mains 230 V AC, 50 Hz |
| Amplification | Class D, 1000 W |
| Frequency response | 50 Hz - 20 kHz |
| Woofer | 12" (300 mm) woofer |
| Tweeter | 1" (25 mm) tweeter |
| Input connectors | Female XLR, 6.35 mm jack |
| Output connectors | Male XLR (Link) |
| Built-in functions | Equalizer, high-pass filter, limiter |
| Care and cleaning | Clean with a soft, dry cloth. Do not use liquids. |
| Safety | Do not open the device. Disconnect before maintenance. |
| Spare parts and repairability | Parts available from authorized service center. Repair by qualified technician. |
Frequently Asked Questions - Flexsys FM12 DB Technologies
How to turn on the Flexsys FM12 speaker?
Connect the mains power cable, then press the POWER switch on the rear panel. The LED indicator lights up.
What types of cables to use to connect a microphone?
Use a balanced XLR cable. Connect the microphone to the XLR input on the rear panel. For a dynamic microphone, no phantom power is needed.
How to adjust the volume?
Use the VOLUME knob on the front panel. Turn clockwise to increase, counterclockwise to decrease.
What to do if the speaker does not turn on?
Check that the power cable is properly connected and that the mains socket works. If the problem persists, contact customer service.
How to reduce feedback?
Move the microphone away from the speaker, reduce the volume, or use the equalizer to attenuate critical frequencies. Activate the high-pass filter if necessary.
Can I use the speaker as a monitor?
Yes, the Flexsys FM12 is designed to be used as a stage monitor. Place it on the floor tilted towards the user.
How to connect an audio source like an MP3 player?
Use a 3.5 mm jack to 6.35 mm jack adapter and plug it into the Jack input on the rear panel. Set the source volume to a moderate level.
What is the maximum power of the speaker?
The built-in amplification delivers 1000 W in class D, allowing high sound power suitable for small to medium rooms.
How to clean the speaker?
Disconnect the device. Use a soft, dry cloth to wipe the surface. Do not use chemicals or water.
Where to find spare parts?
Spare parts are available from the DB Technologies customer service. Visit the official website or contact your authorized dealer.
User questions about Flexsys FM12 DB Technologies
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Flexsys FM12 - DB Technologies and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Flexsys FM12 by DB Technologies.
USER MANUAL Flexsys FM12 DB Technologies
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DB Technologies
Model : Flexsys FM12
Category : Uncategorized