TRÅDFRI 804.897.51 - Lamp IKEA - Free user manual and instructions
Find the device manual for free TRÅDFRI 804.897.51 IKEA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | LED connected lamp |
| Dimensions | Diameter 20 cm, height 15 cm |
| Weight | 0.3 kg |
| Power supply | 220-240 V AC, 50/60 Hz, mains adapter included |
| Power | 6 W (equivalent 40 W) |
| Luminous flux | 400 lumens |
| Color temperature | 2200 K (warm white) to 4000 K (cool white), adjustable |
| Color rendering index (CRI) | >80 |
| Connectivity | Zigbee, compatible with IKEA Home smart and voice assistants |
| Main functions | Dimming, color temperature adjustment, remote control included, voice control possible |
| Care and cleaning | Unplug before cleaning. Wipe with a dry cloth. Do not use abrasive products. |
| Safety | Protection class II, do not immerse in water, do not expose to excessive humidity |
| Spare parts and repairability | LED non-replaceable, but remote control battery replaceable (CR2032) |
| Brand | IKEA |
| Model | TRÅDFRI 804.897.51 |
| Warranty | 2 years |
Frequently Asked Questions - TRÅDFRI 804.897.51 IKEA
How to connect the TRÅDFRI lamp to the IKEA Home smart gateway?
Make sure the gateway is on and connected to the Internet. Turn on the lamp, then press and hold the reset button (under the cap) for 5 seconds until the light blinks. Use the IKEA Home smart app to add the device following the instructions.
Can I use the lamp without the gateway?
Yes, the lamp can be used as a standard lamp with the wall switch, but connected functions (dimming, color change, remote control) require the gateway.
How to replace the remote control battery?
Open the battery compartment on the back of the remote. Replace the used CR2032 battery with a new one, respecting polarity (+/-). Close the compartment.
The lamp does not turn on, what should I do?
First check that the power adapter is properly plugged in and the lamp is turned on via the switch. If it still does not light up, try resetting it (hold the button under the cap for 5 seconds). If the problem persists, contact IKEA support.
Can I adjust brightness with a wall switch?
No, the standard wall switch only allows on/off. To adjust brightness or color temperature, use the supplied remote control or the app.
What is the lighting angle of this lamp?
The lighting angle is approximately 120 degrees, providing a wide and even light distribution.
Is the lamp compatible with Alexa or Google Home?
Yes, via the IKEA Home smart gateway, you can connect the lamp to Alexa or Google Home to control the light by voice command.
Can I use this lamp in a bathroom?
This lamp is not designed for wet rooms (IP20). Do not use it in a bathroom or near water.
How to pair multiple TRÅDFRI lamps?
In the IKEA Home smart app, create a room or group, then add each lamp following the pairing procedure. You can then control the whole group simultaneously.
The lamp flickers randomly, what should I do?
This may be due to interference or weak signal. Move the lamp closer to the gateway or remove obstacles. Also check that the remote control battery is not depleted. Reset the lamp if necessary.
User questions about TRÅDFRI 804.897.51 IKEA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lamp in PDF format for free! Find your manual TRÅDFRI 804.897.51 - IKEA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TRÅDFRI 804.897.51 by IKEA.
USER MANUAL TRÅDFRI 804.897.51 IKEA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : IKEA
Model : TRÅDFRI 804.897.51
Category : Lamp