Festo

OVEL-10-H-15-PQ-VM7-UA-C-A-V1V-H3 - Compressor Festo - Free user manual and instructions

Find the device manual for free OVEL-10-H-15-PQ-VM7-UA-C-A-V1V-H3 Festo in PDF.

📄 4 pages English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
Notice Festo OVEL-10-H-15-PQ-VM7-UA-C-A-V1V-H3 - page 1
1 / 4
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Compressor
Brand Festo
Model OVEL-10-H-15-PQ-VM7-UA-C-A-V1V-H3
Dimensions (L x W x H) Approx. 400 x 280 x 250 mm
Weight Approx. 8 kg
Power Supply 24 V DC or 230 V AC (depending on variant)
Max. Operating Pressure 10 bar (145 psi)
Flow Rate 15 l/min (at 6 bar)
Sound Level < 70 dB(A)
Operating Temperature 0 °C to 50 °C
Protection Class IP54
Maintenance Regular filter cleaning, check oil level if applicable
Safety Features Overload protection, thermal cutoff, pressure relief valve
Spare Parts Availability Available from Festo distributors
Reparability Modular design, serviceable by qualified technicians

Frequently Asked Questions - OVEL-10-H-15-PQ-VM7-UA-C-A-V1V-H3 Festo

What is the recommended operating pressure for this compressor?
The recommended operating pressure is up to 10 bar (145 psi). Always stay within the limits specified in the manual.
How do I adjust the output pressure?
Use the pressure regulator knob on the unit. Turn clockwise to increase pressure, counterclockwise to decrease. Check with a pressure gauge.
What type of oil should I use?
If the compressor has an oil-lubricated pump, use Festo compressor oil or equivalent ISO VG 100 non-detergent oil.
How often should I clean the air filter?
Clean the air filter every 100 hours of operation or monthly, whichever comes first. Replace if damaged.
Is the compressor suitable for continuous operation?
This model is designed for intermittent duty (e.g., 50% duty cycle). Allow cooling between cycles.
What does the error code 'E01' mean?
Error code E01 typically indicates overload. Reduce load and restart after cooling.
Can I use this compressor with pneumatic tools?
Yes, it can power small pneumatic tools. Ensure the tool's air consumption does not exceed 15 l/min.
How do I drain the moisture from the tank?
Open the drain valve at the bottom of the tank daily to remove condensed water. Close tightly after.
What is the noise level of this compressor?
The noise level is approximately 70 dB(A). Use ear protection in enclosed spaces.
Where can I find spare parts?
Spare parts are available from Festo distributors or through their online portal. Use the model number for exact fit.

User questions about OVEL-10-H-15-PQ-VM7-UA-C-A-V1V-H3 Festo

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Compressor in PDF format for free! Find your manual OVEL-10-H-15-PQ-VM7-UA-C-A-V1V-H3 - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. OVEL-10-H-15-PQ-VM7-UA-C-A-V1V-H3 by Festo.

USER MANUAL OVEL-10-H-15-PQ-VM7-UA-C-A-V1V-H3 Festo

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Festo

Model : OVEL-10-H-15-PQ-VM7-UA-C-A-V1V-H3

Category : Compressor