VAC140PLV - Vacuum Cleaner ELECTROLUX - Free user manual and instructions
Find the device manual for free VAC140PLV ELECTROLUX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Cyclone bagless vacuum cleaner |
| Brand | Electrolux |
| Model | VAC140PLV |
| Dimensions (L x W x H) | 30 x 28 x 45 cm |
| Weight | 5.5 kg |
| Power supply | 220-240 V, 50-60 Hz |
| Rated power | 750 W |
| Tank capacity | 1.5 L |
| Filtration | Washable HEPA 10 |
| Cyclone system | Multi-cyclonic |
| Operating radius | 8 m |
| Noise level | 75 dB(A) |
| Main functions | Floor and carpet suction, motorized brush, electronic power adjustment |
| Included accessories | Crevice tool, upholstery brush, turbo adapter |
| Maintenance and cleaning | Washable HEPA filter with water, removable and washable tank |
| Safety | Automatic shut-off in case of overheating, motor protection |
| Spare parts and repairability | Filter and battery (not applicable) available, repairability index 7.5/10 |
| General information | User manual included, 2-year warranty |
Frequently Asked Questions - VAC140PLV ELECTROLUX
How to empty the tank of the VAC140PLV vacuum cleaner?
Press the tank unlock button, remove it then empty the contents into a trash can. You can rinse it with warm water and dry it completely before putting it back in place.
How often should the HEPA filter be cleaned?
The HEPA filter should be cleaned every 3 months or as soon as the saturation indicator lights up. Wash it with cold water and let it dry for 24 hours before reinstalling.
What to do if the vacuum loses suction power?
Check the tank: if full, empty it. Clean the HEPA filter and the pre-filter. Inspect the hose and accessories for possible blockages. If the problem persists, contact after-sales service.
Can the VAC140PLV vacuum be used on parquet floors?
Yes, it is suitable for hard floors thanks to its adjustable motorized brush. To avoid scratches, use the 'hard floor' position or deactivate the brush if available.
What do the indicator lights on the appliance mean?
The flashing blue light indicates the tank is full. The steady red light signals overheating: turn off the appliance and let it cool down. The orange light signals a saturated filter.
How to replace the motorized brush?
Turn off and unplug the vacuum. Turn the brush head over, remove the cover screws, take out the old brush and insert the new one. Replace the cover and tighten the screws.
The vacuum makes an abnormal noise, what to do?
Immediately stop the appliance. Check if an object is blocking the brush or hose. Clean the filter and the tank. If the noise persists, an internal component may be damaged: consult a professional.
Can I use the vacuum without the HEPA filter?
No, never use the vacuum without the filter. This would damage the motor and reduce filtration. Make sure the filter is correctly installed before each use.
How to clean the vacuum hose?
Disconnect the hose and use a long flexible object (like an unfolded coat hanger) to remove blockages. You can also rinse it with clear water and dry it completely before reassembling.
Where to find the serial number of the VAC140PLV vacuum?
The serial number is located on the label under the tank or at the back of the appliance. It is required for any spare parts or after-sales service requests.
User questions about VAC140PLV ELECTROLUX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Vacuum Cleaner in PDF format for free! Find your manual VAC140PLV - ELECTROLUX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VAC140PLV by ELECTROLUX.
USER MANUAL VAC140PLV ELECTROLUX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ELECTROLUX
Model : VAC140PLV
Category : Vacuum Cleaner