SOLO VLA - Processor ART - Free user manual and instructions
Find the device manual for free SOLO VLA ART in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tube opto compressor/limiter |
| Brand | ART |
| Model | SOLO VLA |
| Format | 19" rack 1U |
| Inputs | 2 x 6.35mm TRS balanced jacks |
| Outputs | 2 x 6.35mm TRS balanced jacks |
| Power Supply | Mains 100-240 V AC, 50/60 Hz |
| Frequency Response | 10 Hz - 40 kHz |
| Compression Ratio | Variable up to 20:1 |
| Attack | Variable 0.5ms - 10ms |
| Release | Variable 50ms - 2s |
| Tube | 1 x 12AT7 |
| Weight | 2.3 kg |
| Dimensions | 483 x 170 x 44 mm |
| Main Functions | Opto compression, limiter, stereo linking |
| Maintenance and Cleaning | Clean with a dry cloth, avoid moisture |
| Safety | Unplug before cleaning, do not expose to water |
| Spare Parts and Repairability | Replacement tubes available, mains fuse replaceable |
| General Information | Studio or live use, switchable bypass |
Frequently Asked Questions - SOLO VLA ART
How to connect the SOLO VLA?
Use 6.35mm TRS balanced jack cables. Connect the source to the INPUT jacks and the OUTPUT jacks to your console or audio interface.
What is the function of the Link button?
The Link button couples both channels for stereo operation. In linked mode, a single compression setting affects both channels.
How to adjust the threshold?
Turn the THRESHOLD knob to set the level at which compression begins. The lower the threshold, the stronger the compression.
What to do if the sound is distorted?
Check input levels: reduce input gain or increase threshold. Ensure cables are in good condition and power supply is stable.
How to replace the tube?
Unplug the device, remove the cover, locate the 12AT7 tube, unclip it and insert a new tube respecting orientation. Consult the manual for precautions.
Can the device be used in stereo mode?
Yes, activate the Link button to couple the channels. Use both inputs and outputs for a stereo signal.
What is the power supply voltage?
The device operates on a universal range of 100-240 V AC, 50/60 Hz. Ensure your outlet matches.
How to clean the device?
Use a soft, dry cloth. Never use chemical or abrasive cleaners. Unplug the device before cleaning.
What to do in case of a malfunction?
Check the mains fuse (accessible at the rear) and connections. If the problem persists, contact ART customer service.
Where to find the full manual?
The complete user manual is available free in PDF on notice-facile.com on your device's page.
User questions about SOLO VLA ART
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Processor in PDF format for free! Find your manual SOLO VLA - ART and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SOLO VLA by ART.
USER MANUAL SOLO VLA ART
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ART
Model : SOLO VLA
Category : Processor