TAD171 - Uncategorized IFM - Free user manual and instructions
Find the device manual for free TAD171 IFM in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Temperature Sensor |
| Brand | IFM |
| Model | TAD171 |
| Measuring Range | -50 °C to +150 °C |
| Accuracy | ±0.5 °C |
| Output | Analog 4-20 mA |
| Power Supply | 18-30 V DC |
| Dimensions (L x W x H) | 50 x 30 x 30 mm |
| Weight | 100 g |
| Housing Material | Stainless Steel |
| Protection Rating | IP67 |
| Connection | M12 cable, 4-pin |
| Response Time | ≤ 2 s |
| Main Functions | Temperature measurement, proportional analog output |
| Maintenance and Cleaning | Clean with a dry cloth, do not use solvents |
| Safety | Comply with applicable electrical standards |
| Spare Parts and Repairability | Not repairable by user; contact IFM customer service |
| General Information | Industrial temperature sensor, suitable for various fluids |
Frequently Asked Questions - TAD171 IFM
How to install the TAD171 sensor?
To install the sensor, screw it into an appropriate process connection. Observe the torque specified in the manual.
What is the measuring range of the TAD171?
The measuring range is -50 °C to +150 °C.
How to connect the sensor cable?
Connection is made via an M12 4-pin connector. Refer to the wiring diagram in the manual.
What to do if the analog output does not work?
First check the power supply (18-30 V DC). Ensure the output load is within limits. If the problem persists, contact customer service.
How to clean the TAD171 sensor?
Use a dry cloth or slightly damp cloth. Never use aggressive solvents or abrasive products.
What is the accuracy of the sensor?
The accuracy is ±0.5 °C over the entire measuring range.
Can the TAD171 be used in liquids?
Yes, thanks to the IP67 protection rating, the sensor is suitable for temporary immersion. Check the chemical compatibility of the probe.
How to check the proper functioning of the sensor?
Measure the output current between the terminals. At room temperature, it should be approximately 12 mA (for 25 °C). Refer to the correspondence table.
Where can I download the user manual?
The manual is available free of charge in PDF at notice-facile.com. Search for 'IFM TAD171'.
What to do in case of malfunction?
First consult the troubleshooting section of the manual. If the problem persists, contact IFM customer service with the serial number.
User questions about TAD171 IFM
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual TAD171 - IFM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TAD171 by IFM.
USER MANUAL TAD171 IFM
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : IFM
Model : TAD171
Category : Uncategorized