AL1343 - Uncategorized IFM - Free user manual and instructions
Find the device manual for free AL1343 IFM in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Inductive sensor |
| Dimensions (W x H x D) | 40 mm x 40 mm x 30 mm |
| Weight | 55 g |
| Power supply | 10-30 VDC |
| Output function | Normally open (NO) |
| Sensing range | 4 mm flush mountable |
| Housing material | Stainless steel |
| Protection class | IP67 |
| Operating temperature | -25 °C to 70 °C |
| LED indicator | Yes (switching status) |
| Electrical connection | M12 connector, 4-pin |
| Installation type | Flush |
| Switching frequency | 500 Hz |
| Short-circuit protection | Yes |
| Reverse polarity protection | Yes |
| Included accessories | Mounting bracket, instruction manual |
| Maintenance | Clean with dry cloth; no lubrication required |
| Safety | Observe EMC directives; disconnect power before installation |
| Spare parts / Reparability | Not applicable; replace unit if faulty |
| General information | Suitable for automation and control systems |
Frequently Asked Questions - AL1343 IFM
How do I wire the IFM AL1343 sensor?
Connect the brown wire to +VDC (10-30 V), the blue wire to 0 V (GND), and the black wire is the normally open output. Ensure the power is off during wiring.
What is the sensing range of the AL1343?
The sensing range is 4 mm when mounted flush. For non-flush mounting, the range may be slightly larger.
Can the AL1343 be used with AC power?
No, it requires a DC power supply of 10-30 V. It is not designed for AC.
How should I clean the sensor?
Use a dry, lint-free cloth. Do not use solvents or abrasive cleaners. Avoid getting moisture into the connector.
What is the maximum load current for the output?
The maximum load current is 200 mA, short-circuit protected. Ensure the connected load does not exceed this.
Can the sensor detect metal through plastic?
It detects metal objects directly. If a plastic barrier is between the sensor and the target, the sensing distance will be reduced or may not work reliably.
Does the AL1343 have an LED indicator?
Yes, an LED lights up when the target is detected. It helps with setup and monitoring.
How do I mount the sensor?
Use the included mounting bracket. The sensor can be mounted flush or non-flush. For flush mounting, ensure the sensing face is level with the mounting surface.
What is the operating temperature range?
The sensor operates from -25 °C to 70 °C. Avoid exposing it to extreme temperatures outside this range.
Where can I download the manual for AL1343?
You can download the manual from notice-facile.com or the IFM website. Search for model AL1343.
User questions about AL1343 IFM
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual AL1343 - IFM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AL1343 by IFM.
USER MANUAL AL1343 IFM
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : IFM
Model : AL1343
Category : Uncategorized