Cylindra P W Plus - Range hood FABER - Free user manual and instructions

Product type	Range hood
Brand	Faber
Model	Cylindra P W Plus
Category	Decorative hood
Width	90 cm
Depth	50 cm
Height (min-max)	60 - 110 cm
Net weight	18 kg
Power supply	220-240 V ~ 50-60 Hz
Maximum power	300 W
Airflow (max)	650 m³/h
Noise level (max)	65 dB
Lighting type	LED
Number of lights	2
Grease filter	Washable metal filter
Charcoal filter	Optional (recirculation mode)
Controls	Electronic touch controls
Speeds	3 + intensive
Energy class	A+
Repairability index	8.2/10 (estimate)
Manufacturer warranty	2 years

Frequently Asked Questions - Cylindra P W Plus FABER

How to install the Faber Cylindra P W Plus range hood?

Installation must be done by a professional. Maintain a minimum distance of 65 cm between the hood and the cooking surface. Securely mount to the wall following the provided drilling marks.

How to clean the grease filters?

The metal filters can be washed in the dishwasher or by hand with soapy water. Let them dry completely before reinstalling. Cleaning every 2 months is recommended.

How to change the charcoal filter?

The charcoal filter is not included. It is located behind the grease filters. Replace it every 4 to 6 months depending on usage. Open the flap, remove the old filter, and insert the new one.

The hood is making noise, is that normal?

Some noise is normal. In intensive speed, it can reach 65 dB. Check that the filters are clean and the hood is properly fixed. If the noise is abnormal, contact customer service.

How to turn on the hood lighting?

Use the dedicated button on the control panel. The LED light turns on and off independently of the motor. It can be adjusted in intensity depending on the model.

Can I use the hood in recirculation mode?

Yes, the hood can operate in recirculation mode. You need to add an activated charcoal filter kit (optional). The aspirated air is filtered and then returned to the room.

How to adjust the extraction speed?

Press the button corresponding to the desired speed (3 positions + intensive). The intensive button temporarily increases the airflow, then automatically returns to the previous speed.

What to do if the hood does not turn on?

Check the power supply (fuse, circuit breaker). Make sure the plug is properly connected. If the problem persists, contact an authorized technician.

Is it necessary to maintain the electronic controls?

Wipe the buttons with a damp cloth and mild detergent. Avoid abrasive products that could damage the electronics.

Where can I find spare parts for my hood?

Spare parts (filters, bulbs, etc.) are available on the official Faber website or from authorized dealers. Use the model number to order.

USER MANUAL Cylindra P W Plus FABER

IT 3

EN 7

FR 11

DE 16

NL 20

ES 24

PT 28

SV 32

HU 36

CZ 40

HR 44

SI 48

ET 52

PL 56

TR 61

GR 65

RU 69

DA 74

SK 78

NO 82

FI 86

RO 90

LV 94

LT 98

BG 102

MK 106

SR 111

AL 115

AR 119

IT

6. LIGHTING

For your own safety and to ensure proper operation of the appliance, please read this manual carefully before installation and operation. Keep these instructions together with the appliance, even if it is sold or transferred to third parties. It is important that users know all the appliance's operating and safety characteristics.

The cables must be connected by a trained technician.

• The manufacturer shall not be considered responsible for any injury or damage caused by improper installation or use.
• The minimum safety distance between the hob and the suction hood is 650 mm (some models may be fitted at a lower height; please see the paragraph relating to working dimensions and installation).
• If the instructions for installation of the gas hob specify a distance greater than the one indicated, this must be taken into account.
• Check that the mains power supply corresponds to the one indicated on the data plate affixed inside the hood.
• The cut-out devices must be installed in the fixed system according to wiring system regulations.
• For Class I appliances, check that the domestic power supply is adequately earthed.
• Connect the hood to the flue using a pipe with a minimum diameter of 120 mm. The fumes must travel the shortest distance possible.
• All the air venting regulations must be complied with.
• Do not connect the ducting hood to flues that also carry combustion fumes (e.g. boilers, chimneys, etc.).
• If the hood is used in combination with non electric appliances (e.g. gas appliances), a sufficient level of ventilation must be guaranteed in the room to prevent any exhaust backflow. If the kitchen hood is used in combination with appliances that are not electrically powered, the negative pressure in the room must not exceed 0.04 mbar to avoid any risk of the fumes being sucked back into the room by the hood.
• The air must not be extracted through a flue that is also used as an exhaust flue for fumes from gas or other fuel powered combustion devices.
• If it is damaged, the power cable must be replaced by the manufacturer or by a service technician.
• Connect the plug to a socket that complies with current regulations and is in an accessible position.

As regards the technical and safety measures to be taken for exhausting fumes, it is important that the regulations set by local authorities be complied with scrupulously.

CAUTION: remove the protective films before installing the hood.

Only use screws and hardware of a sort suitable for the hood.

CAUTION: failure to install the screws or fixing devices as described in these instructions may mean there is a risk of electric shocks.

Do not look directly at the light through optical devices (binoculars, magnifying glasses...).

Do not flambé food under the hood: you might cause a fire.

This appliance may be used by children over the age of 8 years and by persons with limited psycho-physical and sensory abilities or with insufficient experience and knowledge, provided they are carefully supervised and instructed on how to use the appliance safely and on the dangers that it involves. Make sure that children are not allowed to play with the appliance. Cleaning and maintenance to be performed by the user must not be carried out by children, unless they are under supervision.

Supervise children, to make sure they do not play with the appliance.

The appliance must not be used by persons (including children) with limited psychophysical or sensory capacities or with insufficient experience and knowledge, unless they are carefully supervised and instructed.

Accessible parts may become extremely hot during the use of cooking appliances.

Clean and/or replace the filters after the period of time indicated (danger of fire). See the paragraph on Maintenance and cleaning.

The room must be adequately ventilated when the hood is used simultaneously with appliances that use gas or other fuels (not applicable to appliances that only discharge air into the room).

- The symbol 📁 on the product or on its packaging indicates that the product must not be disposed of with normal domestic waste. The product must be disposed of at a specialist recycling centre for electrical and electronic components. By ensuring that this product is disposed of properly, you will help prevent potential negative consequences for the environment and health that might result from improper disposal. For more detailed in-

formation on how to recycle this product, please contact your local municipal offices, local waste disposal service, or the shop where the product was purchased.

2. USE

• The suction hood has been designed exclusively for domestic use, to eliminate kitchen odours.
• Never use the hood for purposes other than those for which it was designed.
• Never leave high flames under the hood when it is in operation.
• Adjust the intensity of the flame so that it is directed onto the bottom of the cooking pan, making sure it does not wrap around the sides.
• Deep-fryers must be kept under constant supervision when in use: the oil may catch fire if it gets too hot.

3. CLEANING AND MAINTENANCE

- The activated charcoal filter cannot be washed or regenerated, and must be changed approximately every 4 months of operation, or more frequently in the case of particularly intensive use (W).

- The grease filters must be cleaned every 2 months of operation, or more frequently in the case of particularly intensive use. They can be washed in a dishwasher (Z).

• Clean the hood using a damp cloth and neutral liquid detergent.
• Avoid using alcohol or silicone-based products to clean the inside and outside of the cooker hood.

4. CONTROLS

Key Key	press Function	LED
L	Short Switches the lights on/off at maximum intensity. -
T1	Short Turns the motor on/off at the first speed. Fixed
T2	Short Turns the motor on at the second speed. Fixed
	Long press with all loads off (motor and lights)	Activates/Deactivates the Activated Carbon Filters alarm.				LED flashes twice: alarm activated.LED flashes once: alarm deactivated.
T3	Short Turns the motor on at the third speed. Fixed
	Long press with all loads off (motor and lights)	The Filters saturation alarm is reset.				LED S1 flashes 3 times.
T4	Short	Turns the motor on at the Intensive speed.This speed is timed for 6 minutes. At the end of this time, the system automatically returns to the previously selected speed. If activated with the motor off, once the time has passed it switches to OFF mode.It is deactivated by pressing the same key or by switching off the motor.				Fixed
	Long	Activates/Deactivates the remote control.				The LED flashes twice: remote control activated.The LED flashes once: remote control deactivated.
S1	-	Signals the Metal Grease Filters saturation alarm and the need to wash them. The alarm is activated after 100 hours of effective hood operation.				Fixed
	-	Signals the Activated Carbon Odour Filter saturation alarm.The alarm is activated after 200 hours of effective hood operation.				Flashing

5. REMOTE CONTROL (OPTIONAL)

6. LIGHTING

- Please contact the Service Department to change it ("Please contact the service department to purchase it").

1. SAFETY INFORMATION

6. LIGHTING

6. LIGHTING

6. LIGHTING

6. LIGHTING

6. LIGHTING

6. LIGHTING

6. LIGHTING

6. LIGHTING

6. LIGHTING

6. LIGHTING

6. LIGHTING

6. LIGHTING

6. LIGHTING

6. LIGHTING

6. LIGHTING

6. LIGHTING

6. LIGHTING

6. LIGHTING

6. LIGHTING

6. LIGHTING

6. LIGHTING

1. ADMINISTRATION