AXB20STP - Subwoofer Axton - Free user manual and instructions
Find the device manual for free AXB20STP Axton in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Active Subwoofer |
| Brand | Axton |
| Model | AXB20STP |
| Power Output (RMS) | 150 Watts |
| Frequency Response | 30 Hz - 200 Hz |
| Impedance | 4 Ohms |
| Driver Size | 10 inches (25.4 cm) |
| Enclosure Type | Bass-Reflex (Port Tuned) |
| Dimensions (W x H x D) | 320 x 360 x 320 mm |
| Weight | 9.5 kg |
| Finish | Black Wood Grain Vinyl |
| Power Supply | AC 110-240V, 50/60Hz |
| Inputs | Line In (RCA), LFE Input |
| Phase Switch | 0° / 180° |
| Protection Features | Overheat, Overload, Short Circuit Protection |
| Included Accessories | Power Cable, RCA Cable, User Manual |
| Recommended Use | Home Theater, Music System |
| Cleaning Instructions | Wipe with dry cloth; do not use liquid cleaners. |
| Safety Notes | Do not expose to water or extreme heat. Place on stable surface. |
| Repairability / Spare Parts | Spare parts available via Axton service centers. |
Frequently Asked Questions - AXB20STP Axton
How do I connect the Axton AXB20STP subwoofer to my amplifier?
Use the Line In (RCA) or LFE input to connect to your amplifier's subwoofer pre-out. Ensure the power is off when making connections.
Where should I place the subwoofer for best performance?
Place the subwoofer near a wall or corner for enhanced bass. Avoid blocking the bass port. Experiment with placement for optimal sound.
What is the power consumption of the AXB20STP?
The subwoofer consumes up to 200 watts during peak operation and stands by at less than 0.5 watts when idle.
How do I adjust the volume and crossover frequency?
Use the Volume knob to adjust bass level and the Crossover knob (40-150 Hz) to set the upper frequency limit. Match the crossover to your main speakers.
Why is my subwoofer not turning on?
Check the power cable connection and ensure the mains switch is on. Verify that the auto power feature is enabled. If no signal is detected for 15 minutes, it may enter standby.
Can I use the AXB20STP with a soundbar?
Yes, if your soundbar has a subwoofer output (RCA or LFE). Otherwise, you may need a separate subwoofer adapter.
How do I clean the subwoofer?
Unplug the unit and wipe the exterior with a dry, soft cloth. Do not use any liquid cleaners or abrasive materials.
Is the subwoofer magnetically shielded?
No, it is not magnetically shielded. Keep it at least 30 cm away from TVs or CRT monitors to avoid interference.
What is the warranty period for the Axton AXB20STP?
Axton offers a 2-year limited warranty covering manufacturing defects. Register your product online to activate warranty.
Why is there no sound from the subwoofer?
Check all cable connections, ensure the volume is turned up, and the phase switch is correctly set. Also confirm the amplifier is sending a signal to the subwoofer output.
User questions about AXB20STP Axton
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual AXB20STP - Axton and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AXB20STP by Axton.
USER MANUAL AXB20STP Axton
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Axton
Model : AXB20STP
Category : Subwoofer