MTX200 - Saw MTM - Free user manual and instructions
Find the device manual for free MTX200 MTM in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Circular Saw |
| Brand | MTM |
| Model | MTX200 |
| Blade Diameter | 200 mm |
| Power Source | 1200 W, 230 V AC |
| No-Load Speed | 5000 rpm |
| Cutting Depth at 90° | 65 mm |
| Cutting Depth at 45° | 45 mm |
| Bevel Capacity | 0° - 45° |
| Dimensions (L x W x H) | 300 x 200 x 250 mm |
| Weight | 4.5 kg |
| Main Functions | Cross-cutting, rip cutting, bevel cutting |
| Safety Features | Blade guard, spindle lock, safety switch |
| Maintenance | Lubricate bearings, clean blade guard, check carbon brushes |
| Spare Parts Available | Carbon brushes, blade, power cord |
| Repairability | Replaceable brushes and blade; motor serviceable by technician |
| General Information | Use with appropriate safety gear; check local regulations |
Frequently Asked Questions - MTX200 MTM
How do I change the blade on the MTX200 saw?
Unplug the saw. Press the spindle lock and loosen the arbor bolt using the supplied wrench. Remove the outer flange and old blade. Place the new blade with teeth facing forward. Reassemble and tighten the bolt securely.
What is the maximum cutting depth of the MTX200?
The maximum cutting depth is 65 mm at a 90° angle and 45 mm at a 45° bevel angle.
How do I adjust the bevel angle?
Loosen the bevel adjustment knob located near the base. Tilt the base to the desired angle (0° to 45°). Tighten the knob securely before cutting.
What maintenance does the MTX200 require?
Regularly clean the blade guard and ventilation slots. Lubricate motor bearings with lightweight oil. Inspect and replace carbon brushes when worn (< 5 mm).
What safety precautions should I take?
Always wear safety goggles and hearing protection. Keep hands clear of the blade. Use a push stick for small workpieces. Disconnect power when changing blades.
What should I do if the saw won't start?
Check the power cord for damage. Ensure the safety switch is engaged. Inspect carbon brushes; replace if worn. If the motor still does not run, consult a qualified technician.
How do I replace the carbon brushes?
Unplug the saw. Remove brush caps on the motor housing. Slide out old brushes, insert new ones (same size), and replace caps. Run the saw for a few minutes to seat brushes.
What type of blade can I use with the MTX200?
Use a 200 mm diameter blade with a 20 mm arbor hole. Choose a blade appropriate for the material (e.g., wood, metal, masonry) with suitable tooth count.
How do I adjust the cutting depth?
Loosen the depth adjustment lever on the rear of the saw. Move the base up or down to the desired depth (marked on the scale). Tighten the lever securely.
Is the MTX200 suitable for cutting wood?
Yes, with the correct wood-cutting blade. It is ideal for plywood, softwood, and hardwood. For fine cuts, use a blade with more teeth (e.g., 40T).
User questions about MTX200 MTM
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual MTX200 - MTM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MTX200 by MTM.
USER MANUAL MTX200 MTM
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MTM
Model : MTX200
Category : Saw