UMS 20 - Uncategorized Schoeps - Free user manual and instructions
Find the device manual for free UMS 20 Schoeps in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Condenser Microphone |
| Model | Schoeps UMS 20 |
| Acoustic Principle | Pressure gradient transducer |
| Polar Pattern | Cardioid (typical) |
| Frequency Response | 40 Hz – 20 kHz |
| Sensitivity | 12 mV/Pa ± 1 dB |
| Maximum SPL | 130 dB SPL (at 0.5% THD) |
| Self-Noise | 16 dB-A |
| Power Requirement | 48 V phantom power (P48) |
| Current Consumption | 4 mA |
| Connector | XLR 3-pin male |
| Dimensions (Diameter) | 20 mm |
| Length | 100 mm |
| Weight | 50 g |
| Finish | Matte nickel (standard) |
| Operating Temperature | -10°C to 60°C |
| Relative Humidity | 0 – 95% (non-condensing) |
| Included Accessories | Microphone clip, windscreen, case |
| Maintenance | Clean with soft dry cloth; avoid moisture |
| Repairability | Modular design; parts replaceable by authorized service |
| Safety | Use only with P48 phantom power; protect from physical shock |
Frequently Asked Questions - UMS 20 Schoeps
How do I connect the UMS 20 to my audio interface?
Use a standard XLR cable and ensure your interface provides 48V phantom power. Connect the male XLR of the microphone to the female input of the interface.
What is the recommended distance for recording?
For most applications, place the microphone 15–30 cm from the sound source. Adjust as needed for room acoustics.
Can I use the UMS 20 outdoors?
Yes, with proper wind protection. Use the included windscreen and avoid direct rain. High humidity may require additional protection.
How do I clean the microphone?
Gently wipe the exterior with a soft, dry cloth. Do not use solvents or insert objects into the grille.
What is the polar pattern of the UMS 20?
The UMS 20 features a cardioid polar pattern, which captures sound from the front and rejects noise from the sides and rear.
Does the UMS 20 require battery power?
No, it operates solely on 48V phantom power from a mixer or audio interface. No battery is needed.
What is the frequency response?
The frequency response is 40 Hz – 20 kHz, providing a natural and accurate sound reproduction.
Is the UMS 20 compatible with wireless systems?
Yes, using an appropriate XLR-to-wireless adapter. Ensure the adapter supplies phantom power if required.
How do I mount the microphone?
Insert the microphone into the included clip and attach it to a stand. Tighten the screw to secure.
What should I do if the microphone produces no sound?
Check that phantom power is enabled on your interface, the XLR cable is fully inserted, and the channel is not muted.
User questions about UMS 20 Schoeps
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual UMS 20 - Schoeps and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UMS 20 by Schoeps.
USER MANUAL UMS 20 Schoeps
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Schoeps
Model : UMS 20
Category : Uncategorized