CMIT 5U - Microphone Schoeps - Free user manual and instructions
Find the device manual for free CMIT 5U Schoeps in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Shotgun Microphone |
| Brand | Schoeps |
| Model | CMIT 5U |
| Transducer Principle | Pressure gradient with interference tube |
| Polar Pattern | Supercardioid / Lobar |
| Frequency Range | 40 Hz – 20 kHz |
| Sensitivity | 13 mV/Pa (±1 dB) |
| Impedance | 25 ohms |
| Maximum SPL | 132 dB SPL (1% THD) |
| Equivalent Noise | 13 dB(A) |
| Signal-to-Noise Ratio | 81 dB(A) (re. 1 Pa) |
| Power Requirement | 48 V phantom power (P48, DIN 45596) |
| Current Consumption | 2.0 mA |
| Output Connector | XLR-3M (3-pin male) |
| Dimensions (L x Diameter) | 228 mm x 19 mm (capsule) / 13 mm (body) |
| Weight | 55 g (approx.) |
| Included Accessories | Mount, windscreen, case |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -20°C to +70°C |
| Maintenance | Clean with soft dry cloth; store in case; avoid moisture |
| Spare Parts | Capsule, windscreen, cable available from Schoeps |
Frequently Asked Questions - CMIT 5U Schoeps
What is the Schoeps CMIT 5U used for?
The CMIT 5U is a professional shotgun microphone designed for film, television, and location recording. Its narrow supercardioid/lobar pattern isolates the sound source and minimizes ambient noise.
What power does the CMIT 5U require?
It requires 48 V phantom power (P48, DIN 45596) with a current consumption of 2.0 mA. It is compatible with most audio interfaces and mixers that supply phantom power.
How can I reduce wind noise with this microphone?
Use the included foam windscreen for light wind or a blimp (zeppelin) and dead cat (furry cover) for outdoor use. The interference tube is sensitive to wind, so external protection is recommended.
Can I use the CMIT 5U indoors?
Yes, it performs well indoors. Its lobar pattern rejects room reflections and focuses on the desired source. However, in very reflective rooms, a more directional pattern may still pick up some ambient sound.
What mount is included with the microphone?
The CMIT 5U comes with a SG 5 suspension mount that isolates the microphone from mechanical vibrations. It can be attached to a boom pole or stand via the standard 3/8" thread.
How do I clean and maintain the CMIT 5U?
Clean the exterior with a soft, dry cloth. Avoid moisture and solvents. Store the microphone in its case when not in use. The windscreen can be washed with mild soap and air-dried.
What type of cable does the CMIT 5U use?
It has a standard XLR-3M (3-pin male) output. Use a high-quality balanced XLR cable. The microphone does not require a special cable.
Is the Schoeps CMIT 5U compatible with wireless systems?
Yes, it can be connected to wireless transmitters via a standard XLR adapter. Ensure the transmitter provides 48 V phantom power (or use an external phantom power supply).
What is the warranty for Schoeps products?
Schoeps offers a 2-year warranty on new products. Registration may extend it. Check official documentation or contact Schoeps for details.
What polar pattern does the CMIT 5U have?
It has a supercardioid/lobar pattern, which is more directional than a typical supercardioid. It provides excellent side rejection and a narrow pickup angle.
User questions about CMIT 5U Schoeps
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Microphone in PDF format for free! Find your manual CMIT 5U - Schoeps and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CMIT 5U by Schoeps.
USER MANUAL CMIT 5U Schoeps
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Schoeps
Model : CMIT 5U
Category : Microphone