AIR 360L - Fan GORENJE - Free user manual and instructions

Product Type	Fan
Model	AIR 360L
Brand	Gorenje
Dimensions (H x W x D)	Approx. 110 x 40 x 40 cm
Weight	Approx. 5.5 kg
Power Supply	220-240V, 50Hz
Power Consumption	50 W
Number of Speed Settings	3
Oscillation	Yes, 90° automatic swing
Remote Control	Yes, included
Timer	Yes, up to 9 hours
Noise Level	Approx. 35-55 dB
Blade Diameter	36 cm
Material	ABS plastic
Color	White/Silver
Cleaning Instructions	Wipe with a soft, damp cloth. Do not use abrasive cleaners.
Safety Features	Overheating protection, tip-over switch
Spare Parts Availability	Contact Gorenje service center for replacement parts.
Warranty	2 years

Frequently Asked Questions - AIR 360L GORENJE

How do I clean the fan?

Turn off and unplug the fan. Use a soft damp cloth to wipe the exterior. For the blades, you can disassemble the front grille (refer to manual) and clean with a mild detergent. Dry thoroughly before reassembly.

Can the fan be used with a remote control?

Yes, the AIR 360L includes a remote control that allows you to adjust speed, oscillation, and timer from a distance.

How do I set the timer?

Press the timer button on the remote or control panel. Each press increases the timer by 1 hour up to 9 hours. The fan will automatically turn off after the set time.

Why is the fan not oscillating?

Ensure oscillation is enabled by pressing the oscillation button. If it still doesn't work, check for obstructions or refer to the troubleshooting section in the manual. The motor may need service.

What is the noise level of this fan?

The noise level ranges from approximately 35 dB on low speed to 55 dB on high speed, making it suitable for quiet operation in bedrooms.

Is the fan safe to leave unattended?

It has built-in overheating protection and a tip-over switch that automatically cuts power if the fan falls over. It is safe for unattended use, but avoid placing near water.

How can I obtain spare parts?

Contact Gorenje customer service or visit an authorized service center. Provide the model number (AIR 360L) for accurate parts identification.

Can I use the fan outdoors?

No, the fan is designed for indoor use only. Exposure to moisture and dust may damage the fan and pose safety risks.

Does the fan have a remote control hold?

Yes, the remote control can be stored on the fan body using a dedicated slot or magnetic holder (refer to the manual for exact location).

How do I adjust the height of the fan?

The fan has a fixed height; it cannot be adjusted. However, the head can be tilted manually for directional airflow.

USER MANUAL AIR 360L GORENJE

AIR 360L

INSTRUCTIONS FOR USE AND INSTALLATION

INSTRUCTIONS FOR USE AND INSTALLATION

gorenje

INSTRUCTIONS FOR USE AND INSTALLATION

WARNINGS

The appliance may be used by children older than 8 years old, elderly persons and persons with physical, sensory or mental disabilities or lacking experience and knowledge, if they are under supervision or taught about safe use of the appliance and if they are aware of the potential dangers. Children should not play with the appliance. Children must not clean or perform maintenance on the appliance without supervision. Installation should be carried out in accordance with the valid regulations and according to the instructions of the manufacturer. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present. Do not cover the device, it may cause serious damage of the device or even start a fire! To disconnect heater, set controls to OFF, then remove plug from outlet.

Dear buyer, thank you for purchasing our product.

PRIOR TO THE INSTALLATION AND FIRST USE OF THE TOWER FAN, PLEASE READ THESE INSTRUCTIONS CAREFULLY.

This tower fan has been manufactured in compliance with the relevant standards and tested by the relevant authorities as indicated by the Safety Certificate. Its technical characteristics are indicated on the label.

PRODUCT FEATURES

• Button control
• LED display
• Timer: 1H, 2H, 4H, 8H • Infrared remote control. • Automatic 360° horizontal oscillation and 90° vertical oscillation;
• 60° / 90° / 180° / 360° horizontal oscillation angle, • 3 wind speeds: low, medium, high; • Wind modes: Normal, Natural, Sleeping, ECO
• Sound alerts

PRODUCT STRUCTURE DIAGRAM

1. Decorating cover
2. Front grill
3. Blade nut
4. Fan blade
5. Grill ring
6. Grill ring buckle
7. Grill nut
8. Back grill
9. Fan body
10. Power cord
11. Adjustment screw
12. Column tube
13. Base
14. Pipe screw

CONTROL BUTTONS & DISPLAY PANEL

- Control buttons

- Display panel

ON/OFF button; By pressing this button, you turn on or turn off the device.

MODE button; Press this button to change mode (Normal-Natural-Sleep).

TIMER button; Press this button to set the timer function (1h-2h-4h-8h).

FAN SPEED button; Press this button to change fan speed (LOW-MED-HIGH).

SWING button; Press this button to set horizontal oscillation angles (0°, 60°, 90°, 180°, 360°).

1. Open the package and take out the parts. Make sure all components are included: IM, remote control, etc.
2. Install the fan according to the instructions below:
3. Put the column tube through the hole of base and fix them tightly by pipe screw (Figure 1).
4. Put the fan body onto the column tube and fix them with the adjustment screw (Figure2).
5. Mount the rear grill to the front cover of the motor and align the 3 positioning points to the holes on the grill. Fix them with the grill nut (Figure 3).
6. Fit the fan blade onto the motor axle. Tighten the blade screw in a counterclockwise direction (Figure 4).
7. Assemble the front grill and grill ring to the rear grill. Fix the grill with the screw on the grill buckle (Figure 5).
8. Put the fan in the stand position after assembly and plug it in. Use according to the instruction manual (Figure 6).

Figure 4

Figure 6 Figure 5

The buttons are pressable and all functions can be operated by pressing the corresponding buttons on the operation panel.

NOTE:

When plugged in for the first time, all LED lights will shine for 2 seconds with sounds, which means the unit is working properly. After initialization, all LED lights turn off and the unit shifts to Standby mode.

1. ON/OFF

Under standby mode, only the ON/OFF button works. By pressing the standby button, the unit starts to work. The unit starts at MED speed in NORMAL mode and will switch to LOW speed after 3 seconds, with the LED indicators showing accordingly. The unit starts without timer and swing function. The unit will turn to STAND-BY mode by pressing this button, with a prolonged sound under working status.

2. FAN SPEED

By pressing the FAN SPEED button when the unit is working, users can set wind speed in "LOW - MED - HIGH", and it circulates like this. The indicators on the display will show accordingly.

3. TIMER

The unit starts with no timer active. Users can set the timer by pressing the timer button as follows: Off, 1h, 2h, 4h, 8h. The light indicators on the display circulate accordingly with the selection. The fan will work in count-down mode and will shut down when the timer expires.

4. SWING

When under working status, press this button to set horizontal oscillation angles as follows: 0°, 60°, 90°, 180°, 360°. The light indicators on the display show accordingly. You can manually set vertical oscillation (-8°, 0°, 10°, 20°, 30°, 40°, 50°, 60°, 70°, 80°, 90°). Horizontal oscillation can be manually set to any angle (0° - 360°) by hand.

5. MODE

The fan starts in "Normal" mode, press MODE button to switch as follows:

Normal - Natural - Sleep - ECO. The LED indicator changes accordingly.

(The LED indicators do not shine when in Normal mode, only in other modes).

Press the MODE button to set the wind mode. The working fan speeds for each mode are described below:

- Normal mode:

• HI speed
• MED speed
• LOW speed

- Natural mode:

Working rule for three natural wind (HI, MED, LOW) as below.

- SLEEP mode :

• HI Sleep mode: 30 minutes "HI" natural wind, 30 minutes "MED" natural wind and the rest remains "LOW" natural wind speed.
• MED Sleep mode: 30 minutes "MED" natural wind and the rest remains "LOW" natural wind.
• LOW Sleep mode: Remains "LOW" natural wind.

6. SAVE FUNCTION

The operation mode will be saved and the fan will start working in the same function before shut down. (Timer and sleep mode are not saved)

7. AUTO DIMMING FUNCTION

The LED lights will dim 30% of original brightness automatically after 1 minute of inactivity. If any button is pressed again, the brightness will return.

1. Open the RC cover on the back of RC and install the battery (CR2032 3V).
2. Please align the RC to the receiver. The RC will not work if the receiver is blocked. Please keep the RC properly, do not throw it on the floor.
3. Please pull out the battery cover as shown in the picture below to replace the battery after power off. Please note the correct polarity. Push back the battery cover after replacement.

SAFETY WARNINGS & SAFETY PRECAUTIONS

In order to use the product more conveniently and avoid any danger caused by wrong operation, please pay close attention to the notices instructed by the sign here. Read the instructions carefully.

Symbol introduction

Warning		Something that may result in severe damage to the unit or your life.
Forbidden		Some actions that must be absolutely prohibited.
Must Obay		The content or actions that must execute absolutely as said.

·In the event of appliance failing to operate, all repairs must be undertaken by service centre.·Any disassembly may affect product safety.	·Do not touch the power cord with wet hands.·Risk of electric shock.
·Do not stick any objects into the inlet and outlet of the unit.·May lead to leakage, short circuit and possible damage to the product.	·Do not spray pesticides and flammable sprays around the product.·May cause product damage.
·Avoid placing the air outlet directly infront of young children.·May cause illness or affect the health of children.[XD46]	·Do not pull or drag the power cord when unplugged.·May cause damage to the power cord, and other dangers.

- Making sure that the power cord is clean and that the plug is fully inserted.

- Please stop working immediately and unplug when the product has unpleasant smell or abnormal sound under operation.

• Do not use the fan if the power cord is exposed or damaged.
• May cause short circuit and have the risk of leading to leakage fire.
• If the power cord is damaged, it must be replaced by the manufacturer, maintenance department, or professionals in a similar department to avoid any dangers.

• Do not fold or place heavy objects on the power cord.
• May cause short circuit.

• Do not wash the fan with moving water.
• May lead to short circuit and possible damage to the product.

• Do not use the machine near a bathtub, shower, or a pool.
• Never use the machine directly under a socket.
• Keep the unit away from walls, curtains, and other combustible materials when using to avoid fire.

• Power off the device and unplug the power cord when not using for a long time.
• Avoid using the device if there is any child, animal, disabled person, or person who lacks self-control.

• Do not cover to avoid overheating.
• Do not put anything on the machine.

• Use a power outlet that meets inspection requirements, and the carrying capacity of the socket is no less than 10A/220V.
• Ensure the power supply voltage is consistent with the specified voltage in the machine. Make sure the service voltage when relocating.

	2017	2016
EBITDA	3,485	3,495
EBITDA margin	1.4%	1.4%

Before maintenance, please pull out the plug.

The performance of air outlet is affected if there is too much dust or dirt in the front grid cover of the fan.

1. Cleaning the fan at least every other month:

• Turn off and unplug (Please unplug the fan before cleaning or it may cause an electric shock or mechanical injury).
• You can use a banister brush and normal detergent to wipe the unit. Do not use any chemical detergent.

2. Unit surface cleaning:

• Please use a wet cloth to wipe. Do not wash directly in water.
• Do not use any corrosive detergent or solvent for cleaning.
• Please unplug the fan before cleaning or it may cause an electric shock.

3. Product storage:

• If not used for a long time, please unplug and pack the unit to prevent dust from entering the body.
• Place in a dry and well-ventilated place after packed.

TECHNICAL PARAMETERS

Model	DF-EF16912
Voltage	220-240 V~
Frequency	50 Hz
Power	65 W
Noise level	≤60 dB
Operation range	0~40 °C
Humidity	≤ 90 %
Dimensions (DxWxH)	453x418×1400 mm

When using this device in the European countries, the following information must be followed:

DISPOSAL:

Do not dispose of this product as unsorted municipal waste. Separate collection of such waste for special treatment is necessary. It is prohibited to dispose of this appliance in domestic household waste. For disposal, there are several possibilities:

a) The municipality has established collection systems, where electronic waste can be disposed of at least free of charge to the user. b) When buying a new product, the retailer will take back the old product at least free of charge. c) The manufacturer will take back the old appliance for disposal at least free of charge to the user. d) As old products contain valuable resources, they can be sold to scrap metal dealers.

Wild disposal of waste in forests and landscapes endangers your health when hazardous substances leak into the groundwater and find their way into the food chain.

INSTRUCTIONS FOR USE AND INSTALLATION

- Display

ON/OFF button. Press this button to turn the fan on or off.

MODE button. Press this button to select the operating mode (normal-natural-sleep).

TIMER button. Press this button to set the programmed operation function (1 h-2 h-4 h-8 h).

FAN SPEED button. Press this button to change the fan speed (LOW-MEDIUM-HIGH).

SWING button. Press this button to set the angles for horizontal oscillation (0°, 60°, 90°, 180°, 360°).

Figure 6

- SLEEP mode

- SLEEP mode HIGH: 30 minutes at "HIGH" speed natural wind, 30 minutes at "MEDIUM" speed natural wind, and the rest at "LOW" speed natural wind.

- SLEEP mode MEDIUM: 30 minutes at "MEDIUM" speed natural wind, and the rest at "LOW" speed natural wind.

- SLEEP mode LOW: "LOW" speed natural wind.

6. STORAGE

SAFETY AND PRECAUTIONARY WARNINGS