SBS-AC-1200 - Uncategorized STEINBERG - Free user manual and instructions
Find the device manual for free SBS-AC-1200 STEINBERG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Stereo power amplifier |
| Dimensions (W x D x H) | 483 x 350 x 88 mm (2U rack) |
| Weight | 8.5 kg |
| Power supply | 100-240 V AC, 50/60 Hz, 350 W max |
| Output power | 2 x 600 W at 4 ohms, 2 x 400 W at 8 ohms |
| Frequency response | 20 Hz - 20 kHz ±0.5 dB |
| Input impedance | 10 kΩ balanced, 20 kΩ unbalanced |
| Connectivity | 2 balanced XLR inputs, 2 unbalanced 6.35 mm jack inputs, 2 speaker outputs on binding posts |
| Protections | Short circuit, overload, thermal, DC |
| Cooling | Forced air cooling front to rear |
| Housing material | Steel with black finish |
| Main functions | Stereo amplification, integrated protection, clip detection, limiter circuit |
| Maintenance and cleaning | Disconnect the device before cleaning. Use a soft, dry cloth. Do not use solvents or abrasive products. |
| Safety | Do not open the housing. Risk of electric shock. Use only with a grounded outlet. |
| Spare parts and repairability | Replaceable fuses (5x20 mm, T10A). Standard 80 mm fan. Repairs by a qualified technician. |
| General information | Brand: Steinberg, Model: SBS-AC-1200, Category: Power amplifier |
Frequently Asked Questions - SBS-AC-1200 STEINBERG
How to connect the amplifier to an audio source?
Use an XLR or 6.35 mm jack cable to connect your source (mixer, preamp) to the Input 1 and Input 2 inputs. Make sure the amplifier is turned off when connecting.
What speaker power can I use?
The amplifier delivers 2 x 600 W at 4 ohms or 2 x 400 W at 8 ohms. Use speakers with an impedance between 4 and 8 ohms and an RMS power at least equal to that of the amplifier.
How to adjust the volume?
Volume is adjusted using the two rotary potentiometers on the front panel for each channel. Turn slowly to avoid distortion. The Clip indicator lights up in case of saturation.
What to do if the amplifier turns off during use?
This may be due to thermal protection or a short circuit. Check ventilation, reduce volume, and inspect speaker cables. After cooling, the device will restart automatically.
Can I use this amplifier in bridge mode?
No, the Steinberg SBS-AC-1200 is not designed for bridge mode operation. Use it only in stereo.
How to clean the amplifier?
Disconnect the device. Use a slightly damp soft cloth. Never use chemicals or sprays. Clean the ventilation grilles with a soft vacuum.
What type of speaker cable to use?
Use a cable with a minimum cross-section of 2.5 mm² for distances under 10 meters. For longer distances, prefer 4 mm². Strip the ends to 8 mm and insert into the binding posts.
Does the amplifier heat up normally?
Yes, moderate heat is normal. The device has forced ventilation. Ensure at least 10 cm of free space at the front and rear for air circulation.
What to do if a channel does not work?
Check the audio source, cable, and volume potentiometer. Try swapping input cables. If the problem persists, check the internal fuse (T10A 5x20 mm) of the affected channel.
Where to find the electrical diagram or spare parts list?
Refer to the downloadable complete manual. For spare parts (fuses, fan), contact Steinberg after-sales service or an authorized dealer.
User questions about SBS-AC-1200 STEINBERG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual SBS-AC-1200 - STEINBERG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SBS-AC-1200 by STEINBERG.
USER MANUAL SBS-AC-1200 STEINBERG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : STEINBERG
Model : SBS-AC-1200
Category : Uncategorized