SBS-MR-20 - Uncategorized STEINBERG - Free user manual and instructions
Find the device manual for free SBS-MR-20 STEINBERG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Mixing console or audio interface |
| Model | SBS-MR-20 |
| Brand | Steinberg |
| Dimensions (W x D x H) | 480 x 300 x 100 mm |
| Weight | 5.2 kg |
| Power supply | 12 V DC, 2 A power adapter |
| Power consumption | 24 W max |
| Input channels | 20 channels (8 mono + 6 stereo) |
| Main outputs | 2 balanced XLR outputs + 2 6.35 mm jack outputs |
| Connectivity | USB 2.0 for recording and playback |
| Equalization | 3-band equalizer per channel |
| Built-in effects | Reverb, delay, chorus (16 presets) |
| Headphone input | 1 headphone output with dedicated volume |
| Auxiliary input | Stereo RCA input for external sources |
| Main functions | Mixing, multitrack recording, monitoring |
| Maintenance and cleaning | Clean with a soft dry cloth. Avoid solvents |
| Safety | Do not expose to moisture. Disconnect before maintenance |
| Spare parts and repairability | Contact Steinberg customer service for parts |
| General information | For studio or live use. Operating temperature: 5-40°C |
Frequently Asked Questions - SBS-MR-20 STEINBERG
How to connect the SBS-MR-20 to a computer?
Use a standard USB cable to connect the console's USB port to a USB port on your computer. Install the Steinberg drivers if necessary.
What to do if the sound is distorted?
Check the input levels and reduce the gain on the affected channels. Make sure cables are properly connected and that the -20 dB pads are activated if the signal is too strong.
How to use the built-in effects?
Press the 'FX' button to access presets. Use the knobs to select the desired effect (reverb, delay, chorus). Adjust the send level with the 'FX Send' potentiometer.
Can I record directly to an SD card?
The SBS-MR-20 model does not have an SD card reader. For recording, connect it to a computer via USB or use an external recorder connected to the outputs.
How to clean the mixing console?
Disconnect the power. Use a soft slightly damp cloth to wipe the surface. Avoid chemical or abrasive products. Protect connectors from moisture.
What type of cable to use for microphones?
Use good quality balanced XLR cables for microphone inputs. For instruments, use 6.35 mm jack cables, unbalanced or balanced depending on the source.
The power indicator does not light up, what to do?
Check that the power adapter is properly connected and that the outlet works. Try another compatible adapter (12 V, 2 A). If the problem persists, contact customer service.
Can the SBS-MR-20 be used with a battery?
Yes, it is possible to use an external 12 V battery with sufficient capacity (e.g., 12 V, 2 A). Make sure polarity is respected.
How to reset the console to factory settings?
Hold down the 'MUTE' buttons of channels 1 and 2 while turning on the device. Hold until all indicators flash, then release.
Where to find the detailed manual?
The complete manual is available for download on notice-facile.com or on the official Steinberg website, in the support section.
User questions about SBS-MR-20 STEINBERG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual SBS-MR-20 - STEINBERG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SBS-MR-20 by STEINBERG.
USER MANUAL SBS-MR-20 STEINBERG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : STEINBERG
Model : SBS-MR-20
Category : Uncategorized