SBS-PF-600/100W - Scale STEINBERG - Free user manual and instructions
Find the device manual for free SBS-PF-600/100W STEINBERG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Precision digital scale |
| Brand | Steinberg |
| Model | SBS-PF-600/100W |
| Maximum capacity | 600 g |
| Accuracy | 0.1 g |
| Units of measurement | g, oz, ct, gn (depending on model) |
| Platform | Tempered glass, dimensions 12 x 12 cm |
| Power supply | 2 AAA batteries (not included) or USB (cable not included) |
| Display | Backlit LCD |
| Functions | Tare, auto zero, auto off, piece counting |
| Dimensions (L x W x H) | 15 x 13 x 2.5 cm |
| Net weight | Approximately 250 g (with batteries) |
| Housing material | ABS plastic |
| Operating temperature | 0 °C to 40 °C |
| Care and cleaning | Clean the platform with a damp cloth. Do not immerse in water. |
| Safety | Do not overload beyond maximum capacity. Use on a flat and stable surface. Keep out of reach of children. |
| Spare parts and repairability | Standard batteries available everywhere. No specific spare parts; in case of malfunction, contact customer service. |
| Warranty | 2 years (depending on retailer) |
| General information | Compact scale ideal for kitchen, mail, or small objects. Comes with user manual. |
Frequently Asked Questions - SBS-PF-600/100W STEINBERG
How to turn the Steinberg SBS-PF-600/100W scale on and off?
Press the ON/OFF button located on the side or under the device. The screen turns on. To turn off, hold the same button for a few seconds. The scale turns off automatically after 2 minutes of inactivity.
What is the maximum capacity of the scale?
The maximum capacity is 600 g. Do not exceed this limit to avoid damaging the sensor.
How to use the tare function?
Place an empty container on the platform, then press the Tare (or ZERO) button. The display shows 0 g. Then add the ingredient to be weighed.
What units of measurement are available?
You can switch between units g (grams), oz (ounces), ct (carats) and gn (grains) by pressing the UNIT button.
What to do if the scale displays 'Err' or 'O-Ld'?
The message O-Ld indicates overload: remove the object immediately. 'Err' may indicate a sensor fault or low battery. Replace the batteries and ensure the scale is on a flat surface.
How to change the batteries?
Turn the scale over, open the battery compartment by sliding the cover. Insert two AAA batteries respecting polarity. Close the compartment.
Can the scale be used to weigh liquids?
Yes, provided you use a suitable container and the tare function. Be careful not to spill liquid on the display or housing.
How to clean the scale?
Wipe the glass platform with a soft, slightly damp cloth. Do not use abrasive products or solvents. Never immerse the scale in water.
Does the scale come with batteries?
No, batteries are not included. You need to purchase two AAA (LR03) batteries separately.
What to do if the scale no longer turns on?
First check the batteries: replace them if they are dead. Make sure the compartment is properly closed. If the problem persists, contact Steinberg customer service.
User questions about SBS-PF-600/100W STEINBERG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Scale in PDF format for free! Find your manual SBS-PF-600/100W - STEINBERG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SBS-PF-600/100W by STEINBERG.
USER MANUAL SBS-PF-600/100W STEINBERG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : STEINBERG
Model : SBS-PF-600/100W
Category : Scale