ST-10 - Receiver NuPrime - Free user manual and instructions
Find the device manual for free ST-10 NuPrime in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stereo Power Amplifier / Receiver |
| Brand | NuPrime |
| Model | ST-10 |
| Dimensions (W x D x H) | 430 x 275 x 65 mm |
| Weight | 5.5 kg |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 400W max, <0.5W standby |
| Output Power (8 ohms) | 150W x 2 |
| Output Power (4 ohms) | 230W x 2 |
| Amplifier Class | Class D |
| Frequency Response | 10Hz - 50kHz ±0.5dB |
| Total Harmonic Distortion | <0.01% |
| Input Sensitivity | 1.2V (RCA), 2.4V (XLR) |
| Input Impedance | 47k ohms (RCA), 23.5k ohms (XLR) |
| Speaker Impedance | 4 - 8 ohms |
| Inputs | 1 x RCA stereo, 1 x XLR stereo |
| Outputs | Speaker terminals (bi-wire compatible) |
| Other Connectors | Trigger input (3.5mm), IEC power inlet |
| Cooling | Convection (no fan) |
| Chassis Material | Aluminum |
| Cleaning | Wipe with a soft, dry cloth. Do not use solvents. |
| Safety | Double-insulated; no user-serviceable parts inside. Refer to qualified service personnel. |
| Spare Parts & Repairability | Contact NuPrime authorized service centers. Some internal fuses are replaceable by a technician. |
| Warranty | 2 years (may vary by region) |
Frequently Asked Questions - ST-10 NuPrime
What is the power output of the NuPrime ST-10?
The NuPrime ST-10 delivers 150W per channel into 8 ohms and 230W per channel into 4 ohms.
Does the ST-10 have a headphone jack?
No, the ST-10 is a pure power amplifier and does not include a headphone output. It is designed to drive passive speakers.
Can I use the ST-10 with a preamplifier?
Yes, the ST-10 accepts RCA and XLR inputs from a preamplifier or source with volume control. It has an input sensitivity of 1.2V (RCA) and 2.4V (XLR).
What is the standby power consumption?
The standby power consumption is less than 0.5W, making it energy-efficient when not in use.
How do I connect speakers to the ST-10?
Use bare wire or banana plugs to connect speakers to the binding posts. The amplifier supports bi-wiring with separate positive and negative terminals for each channel.
Is the ST-10 compatible with 4 ohm speakers?
Yes, the ST-10 is designed to drive 4 ohm speakers, delivering up to 230W per channel in that configuration.
Does the ST-10 include a built-in DAC?
No, the ST-10 is a power amplifier only. It does not have a digital input or built-in DAC. You will need an external source or preamplifier with analog outputs.
How should I clean the ST-10?
Disconnect the power, then wipe the chassis with a soft, dry cloth. Do not use any liquids, abrasives, or solvents.
What does the trigger input do?
The trigger input (3.5mm) allows the ST-10 to turn on/off automatically when connected to a compatible preamplifier or source with trigger output (e.g., 12V).
Where can I find the user manual for the ST-10?
You can download the official user manual from the NuPrime website or from notice-facile.com. The manual includes detailed specifications, connection diagrams, and troubleshooting tips.
User questions about ST-10 NuPrime
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual ST-10 - NuPrime and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ST-10 by NuPrime.
USER MANUAL ST-10 NuPrime
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NuPrime
Model : ST-10
Category : Receiver