DAC-10H - Receiver NuPrime - Free user manual and instructions
Find the device manual for free DAC-10H NuPrime in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | DAC and Headphone Amplifier / Preamplifier |
| Brand | NuPrime |
| Model | DAC-10H |
| Category | Receiver (Digital-to-Analog Converter) |
| Dimensions (W x D x H) | 280 x 300 x 60 mm (11.0 x 11.8 x 2.4 inches) |
| Weight | Approx. 5 kg (11 lbs) |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Power Consumption | < 40 W (standby < 0.5 W) |
| Supported PCM Sampling Rates | 44.1 kHz to 384 kHz, 16/24/32-bit |
| Supported DSD Sampling Rates | DSD64 to DSD256 (via DoP and native) |
| DAC Chip | AKM AK4490EQ |
| Digital Inputs | USB Type-B, 1x Optical (Toslink), 1x Coaxial (RCA), 1x AES/EBU (XLR) |
| Analog Inputs | 1x RCA stereo (line in), 1x XLR stereo (balanced) |
| Analog Outputs | 1x XLR balanced (pre-out), 1x RCA unbalanced (pre-out), 1x 6.3mm headphone jack, 1x 4-pin XLR headphone jack |
| Frequency Response | 20 Hz – 20 kHz (±0.1 dB) |
| Signal-to-Noise Ratio | > 120 dB (A-weighted) |
| Total Harmonic Distortion + Noise | < 0.001% (at 1 kHz, 2 Vrms out) |
| Headphone Output Impedance | < 1 ohm |
| Remote Control | Yes (included, CR2025 battery) |
| Functions | Volume control, input selection, filter settings (4 types), pre-amplifier mode, independent headphone amplifier |
| Care and Cleaning | Wipe with a soft, dry cloth. Do not use solvents or liquids. Keep away from moisture and dust. |
| Safety Instructions | Do not expose to rain or moisture. Do not block ventilation openings. Use only the supplied power cord. |
| Spare Parts and Repairability | No user-serviceable parts. Contact NuPrime authorized service center for repairs. |
| General Information | Class A output stage; FR-4 double-sided PCB; aluminum chassis. Operating temperature: 0°C to 40°C. |
Frequently Asked Questions - DAC-10H NuPrime
How do I connect the DAC-10H to my computer?
Use the USB Type-B input with a USB 2.0 cable. On Windows, install the NuPrime USB driver from the official website. Mac and Linux are plug-and-play.
Does the DAC-10H support DSD playback?
Yes, it supports DSD64 to DSD256 via DoP (DSD over PCM) and native DSD over USB.
Can I use the DAC-10H as a preamplifier?
Yes, it has adjustable analog outputs (XLR and RCA) that can be set to fixed or variable output via the remote or front panel.
What headphone impedance can the DAC-10H drive?
The headphone output can drive headphones from 16 ohms to 600 ohms with excellent linearity.
How do I switch between digital filters?
Press the 'Filter' button on the remote or front panel. There are four filters: Sharp, Slow, Short Sharp, Short Slow.
Why is there no sound from the headphones?
Check that the headphone output is selected (press the 'Headphone' button). Ensure volume is not muted or set to zero. Also verify the input source.
Does the DAC-10H require external drivers?
On Windows, yes. Download the latest driver from NuPrime's support page. On macOS and Linux, no driver is needed.
How do I update the firmware?
Firmware updates are done via USB. Download the firmware file and updater tool from the NuPrime website and follow the included instructions.
The remote control is not working. What should I do?
Replace the CR2025 battery. Ensure there are no obstructions between the remote and the DAC-10H's IR sensor.
Can I use the DAC-10H with a balanced headphone?
Yes, the 4-pin XLR output provides balanced drive for compatible headphones.
User questions about DAC-10H NuPrime
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual DAC-10H - NuPrime and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DAC-10H by NuPrime.
USER MANUAL DAC-10H NuPrime
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NuPrime
Model : DAC-10H
Category : Receiver