Q6 Plus - Battery charger ISDT - Free user manual and instructions
Find the device manual for free Q6 Plus ISDT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Battery Charger |
| Brand | ISDT |
| Model | Q6 Plus |
| Input Voltage | 7-32V DC |
| Max Charge Power | 200W |
| Charge Current Range | 0.1-14A |
| Discharge Current Range | 0.1-3A (max 25W) |
| Compatible Battery Types | LiPo, LiIon, LiFe, NiMH, NiCd, Pb |
| Cell Count | 1-6S (LiPo/LiIon/LiFe), 1-16 cells (NiMH/NiCd), 1-12V (Pb) |
| Balance Current | 300mA/cell |
| Display | OLED, 128x64 pixels |
| Dimensions (L x W x H) | 100 x 103 x 38 mm |
| Weight | 240 g |
| Cooling | Active fan |
| Control | Touch wheel + button |
| Regenerative Discharge | Yes |
| Storage Mode | Yes (auto charge/discharge to storage voltage) |
| Cyclic Charge/Discharge | 1-5 cycles |
| Safety Features | Reverse polarity protection, over-temperature, over-current, auto-timer |
| Included Accessories | XT60 lead, balance board, temperature sensor |
| Material | Aluminum alloy casing |
| Maintenance & Cleaning | Keep clean, ensure ventilation, no moisture |
Frequently Asked Questions - Q6 Plus ISDT
What battery types does the ISDT Q6 Plus support?
The Q6 Plus supports LiPo, LiIon, LiFe, NiMH, NiCd, and Pb (lead-acid) batteries.
What is the maximum charge current?
Maximum charge current is 14A, but limited by the 200W max power. For example, a 6S LiPo at 14A would exceed 200W, so the current will be reduced.
Does the charger come with a power supply?
No, the Q6 Plus is a DC input charger and does not include a power supply. You need an external DC source (7-32V) such as a battery or an AC-DC power supply.
Can I charge multiple batteries at once?
No, the Q6 Plus has a single output channel. For multiple packs, you would need a parallel charging board, but ensure batteries are of the same type, cell count, and voltage.
What is regenerative discharge?
Regenerative discharge allows the charger to dissipate energy from the battery back into the input source (if capable) instead of wasting it as heat, improving efficiency.
How do I update the firmware?
Firmware can be updated via a USB cable connected to a computer. Download the latest firmware from the ISDT website and use the provided software.
What does the 'storage' mode do?
Storage mode automatically charges or discharges the battery to a safe storage voltage (typically 3.8V/cell for LiPo) to prolong battery life during inactivity.
Is there a temperature sensor included?
Yes, a temperature sensor is included to monitor battery temperature during charging and discharging for safety.
What is the maximum cell count for lithium batteries?
The Q6 Plus supports 1-6 cells (S) for LiPo, LiIon, and LiFe batteries. For NiMH/NiCd, it can handle up to 16 cells.
Can I use the charger while it is powering from a car battery?
Yes, as long as the input voltage is between 7-32V. Ensure the car battery is fully charged and the charger's current draw does not exceed the power supply capability.
User questions about Q6 Plus ISDT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Battery charger in PDF format for free! Find your manual Q6 Plus - ISDT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Q6 Plus by ISDT.
USER MANUAL Q6 Plus ISDT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ISDT
Model : Q6 Plus
Category : Battery charger