P30 - Battery charger ISDT - Free user manual and instructions
Find the device manual for free P30 ISDT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Battery Charger |
| Brand | ISDT |
| Model | P30 |
| Input Voltage | 7-32V DC |
| Output Power | 30W |
| Output Current | 0.1-3.0A adjustable |
| Supported Battery Types | LiPo, LiFe, Li-ion, NiMH, NiCd, Pb |
| Number of Channels | 1 |
| Display | 1.3 inch OLED |
| Dimensions | 80 x 60 x 30 mm |
| Weight | 100 g |
| Charging Modes | Balance, Storage, Discharge, Cycle, Fast Charge |
| Protection | Reverse polarity, over-temperature, over-current, short circuit |
| Cooling | Passive (natural convection) |
| Input Connector | XT30 / XT60 (depending on version) |
| Color | Black |
| Material | Aluminum alloy |
| Accessories Included | Power cord, balance board |
| Maintenance | Wipe with dry cloth; store in dry place |
| Safety Warnings | Use only with compatible batteries; do not leave unattended during charging |
| Spare Parts Availability | Contact ISDT or authorized dealers |
Frequently Asked Questions - P30 ISDT
How do I charge a LiPo battery with the ISDT P30?
Connect the battery to the charger using the balance lead and main leads. Select LiPo mode, set the desired current (e.g., 1C), and choose Balance Charge to ensure cells are balanced.
What power supply do I need for the ISDT P30?
The charger accepts 7-32V DC input. A suitable power supply should be rated for at least 30W. Use a regulated power supply or a deep-cycle battery. Ensure the connector matches XT30 or XT60.
The screen doesn't turn on. What should I check?
First, verify the input power source is connected and providing voltage within range (7-32V). Check the continuity of the power cable and connections. If no power, the charger may be defective - contact ISDT support.
Can I charge NiMH batteries with this charger?
Yes, the P30 supports NiMH and NiCd batteries. Select NiMH mode and set the appropriate current. The charger will automatically detect the number of cells based on voltage.
What does 'Storage' mode do?
Storage mode charges or discharges a LiPo battery to a safe storage voltage (typically 3.8V per cell). This prolongs battery life. Use this mode if you will not use the battery for more than a few days.
How do I update the firmware on my ISDT P30?
The P30 may support firmware updates via USB. Download the latest firmware from the ISDT website, connect the charger to your computer via USB, and follow the update instructions. Ensure the charger is powered.
What is the maximum charging current for a 3S 1300mAh LiPo?
The recommended charge current is 1C, which equals 1.3A. The P30 can output up to 3A, so 1.3A is safe. Do not exceed 1C unless the battery specifies otherwise.
The charger beeps and shows an error when I connect a battery. What does it mean?
Common errors include Reverse Polarity (check lead connections), Cell Count Mismatch (set correct cell count), or Connection Break. Refer to the manual for error code meanings.
Can I charge two batteries at once with the ISDT P30?
No, the P30 is a single-channel charger. It can only charge one battery at a time. For parallel charging, you would need a parallel board and ensure total current does not exceed 3A.
How do I clean and maintain the charger?
Disconnect all power and batteries. Wipe the exterior with a soft, dry cloth. Do not use liquids or solvents. Ensure the cooling vents are free of dust. Store in a cool, dry place.
User questions about P30 ISDT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Battery charger in PDF format for free! Find your manual P30 - ISDT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. P30 by ISDT.
USER MANUAL P30 ISDT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ISDT
Model : P30
Category : Battery charger