Presence Sensor FP2 - Smart Home Aqara - Free user manual and instructions
Find the device manual for free Presence Sensor FP2 Aqara in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Smart Home Presence Sensor |
| Brand | Aqara |
| Model | Presence Sensor FP2 |
| Dimensions | 90mm x 90mm x 20mm |
| Weight | 80g |
| Power Supply | USB-C (5V/1A) or battery (CR123A, not included) |
| Wireless Protocol | Zigbee 3.0 |
| Detection Technology | Millimeter-wave radar |
| Detection Range | Up to 8m directly ahead, 120° horizontal |
| Key Functions | Presence detection, zone detection, fall detection, absence detection |
| Supported Zones | Up to 30 customizable zones |
| Installation | Wall or ceiling mount (bracket included) |
| Operating Temperature | -10°C to 50°C |
| Humidity Range | 0% to 95% RH (non-condensing) |
| Maintenance | Wipe gently with a dry, soft cloth |
| Safety | Low voltage device; complies with CE, FCC |
| Spare Parts & Repairability | Not user-serviceable; contact support for issues |
| Compatibility | Requires Aqara Hub (Zigbee) |
| App Support | Aqara Home app (iOS/Android) |
| Firmware Update | Over-the-air via app |
Frequently Asked Questions - Presence Sensor FP2 Aqara
How do I set up the Aqara Presence Sensor FP2?
Ensure you have an Aqara Hub (Zigbee). Open the Aqara Home app, go to 'Add Device', select FP2, and follow the in-app instructions. Power the sensor via USB-C or insert a CR123A battery, then pair within range of the hub.
What is the detection range of the FP2?
The sensor can detect presence up to 8 meters directly ahead and has a 120° horizontal field of view. Detection works through walls? No, radar cannot penetrate thick walls; it detects within the same room.
Can the FP2 detect falls?
Yes, the sensor includes a fall detection algorithm. When a fall is detected, the sensor sends an alert to your phone via the Aqara app. Note: performance may vary based on environment.
How many zones can I create with the FP2?
You can set up to 30 custom zones for different areas of the room. Each zone can trigger specific automations, like turning on lights when someone enters a certain area.
Does the FP2 require a hub?
Yes, the sensor uses Zigbee 3.0 and must be connected to an Aqara Hub (such as the Aqara M2, M1S, or E1). The hub bridges the sensor to your Wi-Fi network and the app.
What is the difference between presence detection and motion detection?
Traditional motion sensors detect movement, but the FP2 uses millimeter-wave radar to detect stationary presence (e.g., someone sitting or sleeping). This allows for more accurate occupancy sensing.
Can I use the FP2 outdoors?
The sensor is designed for indoor use only. Exposure to rain, snow, or direct sunlight may damage it. Operating temperature is -10°C to 50°C.
How do I clean the sensor?
Use a soft, dry cloth to gently wipe the surface. Avoid using water, chemical cleaners, or abrasive materials.
What power options does the FP2 have?
The sensor can be powered via USB-C (5V/1A) or with a CR123A battery (not included). Battery life depends on usage but typically lasts 6-12 months.
What should I do if the sensor is not detecting correctly?
First, check the placement: the sensor should be at a height of 2.2-2.5m with no obstructions. Ensure your zigbee hub is within range. Update firmware via the app. If issues persist, reset the sensor by pressing the button for 10 seconds.
User questions about Presence Sensor FP2 Aqara
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Smart Home in PDF format for free! Find your manual Presence Sensor FP2 - Aqara and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Presence Sensor FP2 by Aqara.
USER MANUAL Presence Sensor FP2 Aqara
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Aqara
Model : Presence Sensor FP2
Category : Smart Home