Apocalypse Atom 2.5K PRO - Uncategorized Deaf Bonce - Free user manual and instructions
Find the device manual for free Apocalypse Atom 2.5K PRO Deaf Bonce in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Audio Monoblock Amplifier |
| Brand | Deaf Bonce |
| Model | Apocalypse Atom 2.5K PRO |
| RMS Power Output (4 Ohms) | 1,500W |
| RMS Power Output (2 Ohms) | 2,500W |
| RMS Power Output (1 Ohm) | 3,500W |
| Peak Power Output | 5,000W |
| Number of Channels | 1 (Monoblock) |
| Minimum Impedance | 1 Ohm |
| Frequency Response | 10 Hz - 250 Hz |
| Input Sensitivity | 0.2V - 6V |
| Low-Pass Crossover | 50 Hz - 250 Hz (variable) |
| Subsonic Filter | 10 Hz - 50 Hz (variable) |
| Bass Boost | 0 - 12 dB |
| Damping Factor | >500 |
| Signal-to-Noise Ratio | >100 dB |
| Total Harmonic Distortion | <0.1% |
| Dimensions (L x W x H) | 12.6 x 7.9 x 2.4 inches |
| Weight | 8.8 lbs |
| Power Supply Voltage | 10V - 16V DC |
| Fuse Rating | 250A (external) |
| Protection Circuitry | Thermal, Overload, Short Circuit |
| Cooling | Convection + Fan |
| Recommended Speaker Wire Gauge | 8 AWG or larger |
| Remote Turn-On | Yes (12V trigger) |
| Warranty | 1 Year |
Frequently Asked Questions - Apocalypse Atom 2.5K PRO Deaf Bonce
What is the optimal impedance for maximum power from the Apocalypse Atom 2.5K PRO?
The amplifier delivers its rated power at 1 Ohm. For best performance, use a subwoofer setup with a final impedance of 1 Ohm.
Can I bridge this monoblock amplifier?
No, the Apocalypse Atom 2.5K PRO is a monoblock amplifier designed for a single channel. Bridging is not applicable.
What gauge power wire should I use?
For the 2.5K PRO, use at least 8 AWG power and ground wire. For longer runs, consider 4 AWG to ensure adequate current delivery.
Does the amplifier come with a remote bass knob?
Yes, the Apocalypse Atom 2.5K PRO includes a wired remote bass level control for easy adjustment from the driver's seat.
What is the recommended fuse size?
Use a 250A external fuse (sold separately) on the power wire near the battery for protection.
Can I use this amplifier with a stock head unit?
Yes, but you will need a line output converter (LOC) if your factory radio lacks RCA outputs. The amplifier accepts high-level inputs.
How do I set the gain properly?
Set the gain using a multimeter or oscilloscope. With the volume at 75% max, adjust gain until the output voltage matches the desired power into your subwoofer impedance. Avoid distortion.
What type of subwoofer works best with this amp?
A dual 2-ohm or dual 4-ohm subwoofer wired to a 1-ohm load is ideal. Ensure the sub is rated for at least 2500W RMS continuous.
Does the amplifier have built-in crossover?
Yes, it has a variable low-pass filter (50-250 Hz) and subsonic filter (10-50 Hz) to tailor the frequency response to your subwoofer.
What is the warranty period?
Deaf Bonce offers a 1-year limited warranty from the original purchase date against defects in materials and workmanship.
User questions about Apocalypse Atom 2.5K PRO Deaf Bonce
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Apocalypse Atom 2.5K PRO - Deaf Bonce and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Apocalypse Atom 2.5K PRO by Deaf Bonce.
USER MANUAL Apocalypse Atom 2.5K PRO Deaf Bonce
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Deaf Bonce
Model : Apocalypse Atom 2.5K PRO
Category : Uncategorized