Machete MLA-600.1 - Uncategorized Deaf Bonce - Free user manual and instructions
Find the device manual for free Machete MLA-600.1 Deaf Bonce in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Monoblock Class D Car Amplifier |
| RMS Power (4 Ohm) | 600W x 1 |
| RMS Power (2 Ohm) | 1000W x 1 |
| RMS Power (1 Ohm) | 1600W x 1 |
| Frequency Response | 10 Hz – 250 Hz |
| Input Sensitivity | 0.2V – 6V |
| Signal-to-Noise Ratio | >90 dB |
| Damping Factor | >200 |
| Low Pass Filter | 40 Hz – 250 Hz (adjustable) |
| Subsonic Filter | 10 Hz – 40 Hz (adjustable) |
| Bass Boost | 0 – 12 dB (45 Hz) |
| Impedance Stability | 1 Ohm (stable) |
| Power Supply Voltage | 10 – 15 V DC |
| Dimensions (L x W x H) | 240 x 130 x 55 mm |
| Weight | 1.8 kg |
| Protection Features | Short circuit, thermal, overvoltage, undervoltage |
| Remote Control | Remote bass level control included |
| Cooling | Convection cooling with heatsink |
| Material | Aluminum alloy chassis |
| Warranty | 1 year limited |
Frequently Asked Questions - Machete MLA-600.1 Deaf Bonce
What is the RMS power output of the Machete MLA-600.1?
The Machete MLA-600.1 delivers 600W RMS at 4 ohms, 1000W RMS at 2 ohms, and 1600W RMS at 1 ohm.
What impedance loads can this amplifier handle?
It is 1 ohm stable, meaning it can safely drive subwoofers wired to 1 ohm.
Does it include a remote bass level control?
Yes, a wired remote bass level control is included for adjusting bass output from the driver's seat.
What are the dimensions and weight of the amplifier?
Dimensions: 240 x 130 x 55 mm (L x W x H). Weight: approximately 1.8 kg.
What is the frequency response range?
The frequency response is 10 Hz to 250 Hz, optimized for subwoofer use.
Does it have built-in filters?
Yes, it features an adjustable low-pass filter (40-250 Hz) and a subsonic filter (10-40 Hz) to protect your subwoofer.
What type of protection does it have?
It includes protection against short circuits, thermal overload, overvoltage, and undervoltage.
Can I bridge two amplifiers?
This is a monoblock amplifier, designed for single subwoofer use. Bridging two units is not recommended; instead, use a single higher-power model or run each to its own sub.
What voltage range does it accept?
It operates on 10-15 V DC, suitable for standard 12V car electrical systems.
What is the signal-to-noise ratio?
The signal-to-noise ratio is >90 dB, ensuring clean sound with minimal noise.
User questions about Machete MLA-600.1 Deaf Bonce
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Machete MLA-600.1 - Deaf Bonce and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Machete MLA-600.1 by Deaf Bonce.