SCR100 - Measuring equipment Peak - Free user manual and instructions
Find the device manual for free SCR100 Peak in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Measuring Equipment - Moisture Meter |
| Brand | Peak |
| Model | SCR100 |
| Dimensions | Approx. 150 x 60 x 25 mm (5.9 x 2.4 x 1.0 in) |
| Weight | Approx. 150 g (5.3 oz) including battery |
| Power Supply | 1 x 9V alkaline battery (not included) |
| Display | Backlit LCD, clear numerical readout |
| Measurement Range | Wood: 5% to 50% moisture content; Building materials: 0.2% to 2.0% (relative) |
| Accuracy | ±1% for wood; ±0.2% for building materials |
| Measurement Modes | Wood mode, Building Materials mode, Reference mode |
| Auto Power Off | Yes, after 5 minutes of inactivity |
| Data Hold | Yes, freezes current reading on display |
| Low Battery Indication | Battery icon appears when voltage is low |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -10°C to 60°C (14°F to 140°F) |
| Warranty | 1 year limited warranty |
| Maintenance | Keep contacts clean; store in dry place; replace battery as needed |
| Safety Precautions | Avoid contact with live electrical wires; do not use on wet surfaces; keep away from children |
| Spare Parts / Repairability | Contact Peak customer service for replacement probes or batteries; device is not user-serviceable |
Frequently Asked Questions - SCR100 Peak
What is the Peak SCR100 used for?
The Peak SCR100 is a moisture meter designed to measure moisture content in wood and building materials, helping to prevent rot, mold, and structural issues.
How do I turn on the device?
Press and hold the Power button for 2 seconds. The display will turn on. To turn off, press and hold the same button again.
How do I calibrate the SCR100?
The device is factory calibrated. If you need to verify, use the Reference mode with the included test block. For recalibration, contact Peak support.
What type of battery does it use?
It uses a standard 9V alkaline battery (not included). To install, slide off the battery cover and connect the battery.
How do I change between wood and building material modes?
Press the Mode button to cycle between Wood, Building Materials, and Reference modes. The current mode is shown on the display.
Why is the reading unstable?
Ensure the probes are clean and fully inserted into the material. Avoid moving the device during measurement. If problem persists, try a new battery.
Can I measure moisture in concrete?
Yes, but only in Building Materials mode for relative readings. The SCR100 is not intended for precise concrete moisture measurement; use a dedicated hygrometer for critical applications.
What does 'Err' mean on the display?
'Err' indicates an error. This can happen if the probes are shorted (touching each other) or if the measurement is out of range. Check the probes and try again.
How do I clean the device?
Wipe the exterior with a soft, dry cloth. Do not use solvents or water. Clean the probes with isopropyl alcohol and a cotton swab if needed.
Is the SCR100 waterproof?
No, the device is not waterproof. Avoid exposure to rain or splashes. Store in a dry place when not in use.
User questions about SCR100 Peak
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual SCR100 - Peak and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SCR100 by Peak.
USER MANUAL SCR100 Peak
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Peak
Model : SCR100
Category : Measuring equipment