LED IP PAR 7x10W - Projector Eurolite - Free user manual and instructions
Find the device manual for free LED IP PAR 7x10W Eurolite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED PAR Can |
| Model | LED IP PAR 7x10W |
| Brand | Eurolite |
| Light Source | 7 x 10W LEDs (RGBW) |
| Beam Angle | 25° (typical) |
| IP Rating | IP65 (weatherproof) |
| DMX Channels | 4/6/9 selectable |
| Power Consumption | 120W max |
| Operating Voltage | AC 100-240V, 50/60Hz |
| Dimensions (L x W x H) | 290 x 230 x 230 mm (approx.) |
| Weight | 3.5 kg (approx.) |
| Housing Material | Die-cast aluminum |
| Control Modes | DMX, Master/Slave, Auto, Sound-activated |
| Connectors | 3-pin XLR in/out, PowerCON in/out |
| Mounting Options | Floor, truss, wall with brackets |
| Cooling | Passive convection |
| Maintenance & Cleaning | Clean lens with soft cloth; check fans periodically |
| Safety | Keep away from rain; use correct voltage; do not open |
| Spare Parts & Repairability | LED modules, power supply, control board available |
| General Information | Indoor/outdoor use; silent operation; flicker-free |
Frequently Asked Questions - LED IP PAR 7x10W Eurolite
How do I set the DMX address on the Eurolite LED IP PAR 7x10W?
Press the MENU button to enter the menu, navigate to DMX Address using the UP/DOWN buttons, set the desired address, and confirm with ENTER.
Can I use the fixture in master/slave mode?
Yes. Set one unit as Master and others as Slave via the menu. Connect them with DMX cables. The slaves will follow the master's patterns.
How does sound activation work?
In Sound-activated mode, the fixture reacts to ambient music via a built-in microphone. Adjust sensitivity in the menu.
What does IP65 mean for this projector?
IP65 means it is dust-tight and protected against water jets from any direction, making it suitable for outdoor use.
How should I clean the fixture?
Disconnect power, wait for cooling, then use a soft, dry cloth to clean the lens and housing. Avoid abrasive cleaners.
What is the power consumption?
The maximum power consumption is 120W. It operates on standard AC 100-240V.
Can I mount the fixture on a truss?
Yes, use the included mounting bracket with a clamp. Ensure the truss can support the weight (approx. 3.5 kg).
How many units can I link together?
You can link up to 32 units on a single DMX line using the 3-pin XLR connectors. Use a terminator at the end.
Can I replace the LEDs if one fails?
LEDs are soldered; replacement typically requires professional service. Contact Eurolite support for spare parts.
What should I do if the unit does not turn on?
Check the power cable and fuse. Ensure the mains voltage matches. If still no power, contact technical support.
User questions about LED IP PAR 7x10W Eurolite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projector in PDF format for free! Find your manual LED IP PAR 7x10W - Eurolite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LED IP PAR 7x10W by Eurolite.
USER MANUAL LED IP PAR 7x10W Eurolite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eurolite
Model : LED IP PAR 7x10W
Category : Projector