LED PARty TCL Spot - Projector Eurolite - Free user manual and instructions
Find the device manual for free LED PARty TCL Spot Eurolite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED PAR Spot |
| Model | LED PARty TCL Spot |
| Brand | Eurolite |
| Light Source | SMD LEDs |
| Number of LEDs | 7 x 10W |
| Power Consumption | 70W |
| Voltage | AC 100-240V, 50/60Hz |
| Dimensions (L x W x H) | 245 x 245 x 310 mm |
| Weight | 2.5 kg |
| Control Modes | DMX-512, Master/Slave, Sound-Activated, Auto |
| DMX Channels | 7 or 14 (selectable) |
| Beam Angle | 25° |
| IP Rating | IP20 (indoor use only) |
| Housing Material | Metal, black |
| Cooling | Passive convection |
| Safety Precautions | Disconnect power before cleaning; do not expose to moisture |
| Cleaning | Use a soft, dry cloth; no liquids |
| Spare Parts | LED modules replaceable by qualified technician |
| Warranty | 2 years |
| Certifications | CE, RoHS |
Frequently Asked Questions - LED PARty TCL Spot Eurolite
How do I set the DMX address?
Press the Menu button until 'Addr' appears. Use the Up/Down buttons to set the desired address. Press Enter to confirm.
Can the LED PARty TCL Spot be used outdoors?
No, it is rated IP20 and designed for indoor use only. Exposure to rain or moisture can damage the unit.
How do I clean the fixture?
Disconnect from power and wipe the housing with a soft, dry cloth. Do not use any liquids or cleaning agents.
What is the lifespan of the LEDs?
The LEDs are rated for approximately 50,000 hours under normal operating conditions.
How do I replace a blown fuse?
Locate the fuse holder near the power input. Use a screwdriver to open it, replace the old fuse with one of the same rating (e.g., 1A/250V).
How can I connect multiple units in master/slave mode?
Set one unit as master (DMX mode with address 1) and the others as slave (slave mode). Connect them via DMX cables and they will synchronize.
Does the fixture support sound activation?
Yes, select 'Sound' mode from the menu. The built-in microphone will trigger light changes based on music volume.
What is the beam angle?
The beam angle is fixed at 25 degrees, providing a narrow spotlight effect.
How do I reset the fixture to factory defaults?
Press Menu repeatedly until 'Reset' appears. Press Enter, then 'Yes' to confirm. The fixture will reboot with default settings.
Why is the fan not spinning?
This model uses passive cooling, so there is no fan. Ensure proper ventilation around the fixture to avoid overheating.
User questions about LED PARty TCL Spot Eurolite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projector in PDF format for free! Find your manual LED PARty TCL Spot - Eurolite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LED PARty TCL Spot by Eurolite.
USER MANUAL LED PARty TCL Spot Eurolite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eurolite
Model : LED PARty TCL Spot
Category : Projector