FD332 - Uncategorized OPTEX - Free user manual and instructions
Find the device manual for free FD332 OPTEX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type de produit | Motion Detector |
| Brand | OPTEX |
| Model | FD332 |
| Detection Method | Passive Infrared (PIR) |
| Detection Range | 12m x 12m |
| Coverage Angle | 90° |
| Operating Voltage | 9-16V DC |
| Current Consumption | 15mA |
| Temperature Range | -10°C to +50°C |
| Dimensions (HxWxD) | 110mm x 65mm x 45mm |
| Weight | 100g |
| Output | Relay (NC/NO) |
| Mounting Height | 2.2m recommended |
| Pet Immunity | Up to 25kg |
| LED Indicator | Yes |
| Tamper Protection | Yes |
| Certifications | CE, RoHS |
| Maintenance | Clean with dry cloth |
| Safety | Low voltage; professional installation recommended |
| Spare Parts | Not available as standard |
| Repair | Contact authorized service center |
Frequently Asked Questions - FD332 OPTEX
How do I install the OPTEX FD332 motion detector?
Mount the detector at the recommended height of 2.2m. Connect the power supply (9-16V DC) and the relay output to your alarm panel. Ensure the detection area is clear of obstructions. Refer to the manual for detailed wiring diagrams.
What is the detection range of the FD332?
The FD332 has a detection range of up to 12 meters with a 90° coverage angle. Performance may vary based on environment and mounting conditions.
Can the FD332 be used outdoors?
No, the FD332 is designed for indoor use only. Exposure to rain, snow, or direct sunlight may damage the unit and affect performance.
How do I reset the FD332?
The FD332 does not have a physical reset button. To reset, disconnect the power for at least 10 seconds and reconnect. This will clear any latched alarms.
What should I do if the FD332 false alarms?
Check for sources of false triggers such as pets, moving curtains, or heat sources. Adjust the sensitivity if possible. Ensure the detector is mounted securely and not facing reflective surfaces.
Is the FD332 pet immune?
Yes, the FD332 has pet immunity up to 25kg. However, avoid placing the detector where pets can climb directly in front of it.
What type of cable should I use for the FD332?
Use a standard 4-core alarm cable: two wires for power (positive and negative) and two for the relay output. Ensure the cable is rated for the operating voltage and current.
How do I test the FD332 after installation?
Apply power and wait for the LED to stabilize. Walk across the detection area. The LED should illuminate briefly when movement is detected. If using an alarm panel, verify that the zone reports correctly.
What is the warranty period for OPTEX FD332?
OPTEX typically offers a 3-year warranty from the date of purchase. Retain your receipt and contact the seller or OPTEX support for any warranty claims.
Can I connect multiple FD332 detectors to one alarm panel?
Yes, you can connect multiple detectors to the same alarm panel. Each detector should be wired to a separate zone to allow individual identification. Follow your alarm panel's installation instructions.
User questions about FD332 OPTEX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual FD332 - OPTEX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FD332 by OPTEX.
USER MANUAL FD332 OPTEX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : OPTEX
Model : FD332
Category : Uncategorized