SL-200TNR - Uncategorized OPTEX - Free user manual and instructions
Find the device manual for free SL-200TNR OPTEX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Passive Infrared (PIR) Motion Detector |
| Detection Method | Passive Infrared |
| Detection Range | 12 meters (40 feet) |
| Detection Angle | 90° |
| Power Source | 3V CR123A Lithium Battery |
| Battery Life | Up to 3 years (typical use) |
| Dimensions (L x W x H) | 100 x 60 x 40 mm |
| Weight | 150 g (including battery) |
| Mounting Type | Ceiling or wall mount |
| Tamper Protection | Yes, upon cover removal |
| Low Battery Indication | LED flash (red) |
| Alarm Output | Wireless signal (433 MHz) |
| Operating Temperature | -10°C to 50°C |
| Humidity Tolerance | Up to 95% non-condensing |
| Compliance | CE, RoHS |
| Cleaning Instructions | Wipe with a soft dry cloth; do not use solvents |
| Spare Parts Available | Battery (CR123A), mounting bracket |
| Repairability | Battery replacement user-serviceable; internal components not serviceable |
Frequently Asked Questions - SL-200TNR OPTEX
How to install the SL-200TNR?
Select a location 2.2m to 2.5m high, free from obstructions. Use the included screws and anchors for wall/ceiling. Ensure the lens is aimed at the area to be monitored.
How to replace the battery?
Slide off the cover, remove the old CR123A battery, insert a new one with correct polarity, and replace the cover. The LED will flash briefly to confirm.
What is the detection range?
The maximum detection range is 12 meters in a 90° pattern. Reduced range in high temperatures.
How to troubleshoot false alarms?
Ensure the sensor is not facing heat sources (sunlight, heaters). Check for pets moving near the area. Adjust the sensitivity if possible (not adjustable on this model).
What does the red LED blinking mean?
A slow blinking red LED (every 60s) indicates low battery. A quick blink during motion detection is normal operation.
Is the sensor weatherproof?
The SL-200TNR is designed for indoor use only. Do not expose to rain or moisture.
How to pair with a receiver?
Refer to your receiver's manual. Typically, press the test button on the sensor and the learn button on the receiver within 30 seconds.
What to do if the sensor loses connection?
Check battery voltage, ensure no metal objects near the sensor that could block the signal. Re-pair if necessary.
Can I clean the lens with alcohol?
No. Use a soft dry cloth only. Chemical cleaners may damage the lens coating.
How to test if the sensor is working?
Walk across the detection zone; the red LED should flash. If using with an alarm panel, check panel for triggered event.
User questions about SL-200TNR OPTEX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual SL-200TNR - OPTEX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SL-200TNR by OPTEX.
USER MANUAL SL-200TNR OPTEX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : OPTEX
Model : SL-200TNR
Category : Uncategorized