AVO835 - Multimeter Megger - Free user manual and instructions
Find the device manual for free AVO835 Megger in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Multimeter |
| Brand | Megger |
| Model | AVO835 |
| Display | 4-digit LCD with backlight, 6000 counts |
| AC Voltage Range | 600 mV to 1000 V (True RMS) |
| DC Voltage Range | 600 mV to 1000 V |
| AC Current Range | 600 μA to 10 A (True RMS) |
| DC Current Range | 600 μA to 10 A |
| Resistance Range | 600 Ω to 60 MΩ |
| Capacitance Range | 60 nF to 60 mF |
| Frequency Range | 10 Hz to 10 MHz |
| Diode and Continuity Test | Yes |
| True RMS | Yes (AC+AC+DC) |
| Auto-ranging | Yes |
| Data Hold | Yes |
| Min/Max Recording | Yes |
| Safety Rating | CAT III 600V, CAT II 1000V |
| Power Supply | 9V battery (6F22) |
| Dimensions (H x W x D) | 200 x 90 x 50 mm |
| Weight | 350 g (with battery) |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -10°C to 60°C |
| Accessories Included | Test leads, thermocouple, carrying case, manual |
| Maintenance & Cleaning | Wipe with damp cloth; no solvents. Calibrate annually. |
| Repairability | Serviceable by qualified technician; use original parts. |
Frequently Asked Questions - AVO835 Megger
How do I measure AC voltage with the Megger AVO835?
Set the rotary switch to AC voltage (V~). Connect the test leads: black to COM, red to V/Ω. Read the display. For true RMS, select AC+DC mode if needed.
What is the continuity test procedure?
Turn the dial to the continuity/diode position (usually marked with a speaker symbol). Connect the leads across the circuit. A continuous beep indicates continuity (typically <50Ω).
How do I replace the battery?
Turn off the meter. Remove the battery compartment screw on the back. Lift the cover and replace the 9V battery (6F22). Ensure correct polarity. Reattach the cover and screw.
What safety precautions should I follow?
Always use the correct input jacks and switch setting. Do not exceed the rated voltage (CAT III 600V). Inspect leads for damage. Remove test leads before opening the case. Use personal protective equipment when necessary.
What is the accuracy of the AVO835?
DC voltage accuracy is typically ±(0.5%+5 digits). AC voltage accuracy is ±(1%+5 digits) for 45-400Hz. Other ranges have similar specifications. Refer to the manual for full details.
Does the AVO835 have auto-ranging?
Yes, it features auto-ranging for voltage, current, resistance, and capacitance. You can also manually select the range using the RANGE button.
How do I turn on the backlight?
Press and hold the BACKLIGHT button (usually labeled with a light bulb icon) for 2 seconds to toggle the backlight on/off. It automatically turns off after a few minutes to save battery.
What is the maximum input current?
The maximum input current is 10A (unfused) for 30 seconds with a duty cycle of 15 minutes. For continuous use, do not exceed 10A. Use the 10A jack for high currents.
Can I measure temperature with the AVO835?
Yes, it includes a temperature measurement function using a K-type thermocouple (included). Set the dial to TEMP, connect the thermocouple, and read the temperature in °C or °F.
How do I clean and maintain the multimeter?
Turn off the meter and remove the battery. Wipe the exterior with a soft, damp cloth. Do not use solvents or abrasives. For calibration, return to an authorized service center annually or as needed.
User questions about AVO835 Megger
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Multimeter in PDF format for free! Find your manual AVO835 - Megger and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AVO835 by Megger.
USER MANUAL AVO835 Megger
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Megger
Model : AVO835
Category : Multimeter