LED PLL-480 - Lamp Eurolite - Free user manual and instructions
Find the device manual for free LED PLL-480 Eurolite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED PAR Light |
| Model | LED PLL-480 |
| Brand | Eurolite |
| Light Source | 48 x 10W LEDs (RGBW) |
| Beam Angle | 25° (adjustable via lens) |
| DMX Channels | 4/8 channel modes |
| Control Protocol | DMX512, Master/Slave, Sound-activated, Auto |
| Power Supply | 100-240V AC, 50/60Hz |
| Power Consumption | 480W (max) |
| Dimensions (L x W x H) | 300 x 250 x 200 mm |
| Weight | 4.5 kg |
| Housing Material | Metal, black finish |
| Cooling System | Active fan cooling |
| IP Rating | IP20 (indoor use only) |
| Mounting Options | Floor stand, truss clamp, hanging bracket |
| Included Accessories | Power cable, user manual, mounting bracket |
| Maintenance | Clean lens with soft cloth; ensure ventilation slots are free of dust |
| Safety | Use safety cable when hanging; do not look directly into beam; keep away from moisture |
| Spare Parts Available | LED modules, power supply unit, fuses, control board |
| Repairability | Modular design; replaceable LED modules and power supply |
Frequently Asked Questions - LED PLL-480 Eurolite
How do I connect the LED PLL-480 to a DMX controller?
Use a standard 3-pin XLR cable to connect the DMX output of your controller to the DMX input of the fixture. Set the DMX address using the control panel. Refer to the manual for addressing details.
What is the maximum number of fixtures I can daisy-chain?
You can daisy-chain up to 32 LED PLL-480 fixtures on a single DMX line. Ensure each fixture has a unique DMX address to avoid conflicts.
How do I set the fixture to sound-activated mode?
Press the 'Mode' button until 'SND' appears on the display. The fixture will then respond to music via the built-in microphone. Adjust sensitivity via the 'Sensitivity' menu.
Can I use the LED PLL-480 outdoors?
No, the fixture has an IP20 rating and is designed for indoor use only. Exposure to moisture or dust can damage the unit.
How do I replace a failed LED module?
Disconnect power and remove the rear cover. Unscrew the faulty LED module and disconnect its cable. Install a new module and reassemble. Use only genuine Eurolite spare parts.
What is the recommended cleaning procedure?
Unplug the fixture and allow it to cool. Use a soft, dry cloth to gently wipe the lens and housing. Do not use chemical cleaners or abrasive materials.
How can I reset the fixture to factory defaults?
Press and hold the 'Menu' button for 5 seconds. Select 'Reset' and confirm. All settings will return to factory defaults.
Why is the fan making noise?
Fan noise may increase if the ventilation slots are blocked or the fan is dusty. Clean the slots and fan gently with compressed air. If noise persists, the fan may need replacement.
Can I mount the fixture upside down?
Yes, the fixture can be mounted in any orientation. When hanging, always use a safety cable as a secondary attachment.
What does the 'PLL' in the model name stand for?
PLL likely stands for 'Power LED Linear' or similar, indicating a linear array of high-power LEDs. It is a trademark of Eurolite.
User questions about LED PLL-480 Eurolite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lamp in PDF format for free! Find your manual LED PLL-480 - Eurolite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LED PLL-480 by Eurolite.
USER MANUAL LED PLL-480 Eurolite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eurolite
Model : LED PLL-480
Category : Lamp