A44 - Measuring equipment ABB - Free user manual and instructions
Find the device manual for free A44 ABB in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | ABB |
| Model | A44 |
| Product Type | Digital Multimeter |
| Category | Measuring Equipment |
| Display | 6000 count LCD with backlight |
| AC Voltage Range | 0.1 mV to 750 V |
| DC Voltage Range | 0.1 mV to 1000 V |
| AC Current Range | 0.1 µA to 10 A |
| DC Current Range | 0.1 µA to 10 A |
| Resistance Range | 0.1 Ω to 40 MΩ |
| Capacitance Range | 1 nF to 100 µF |
| Frequency Range | 10 Hz to 1 MHz |
| Temperature Range | -20°C to 1000°C (with thermocouple) |
| Safety Rating | CAT III 600V, CAT II 1000V |
| Power Supply | 9V battery (NEDA 1604) |
| Dimensions | 185 x 87 x 55 mm |
| Weight | 370 g (including battery) |
| Functions | Auto-range, data hold, relative mode, continuity buzzer, diode test |
| Accessories Included | Test leads, thermocouple, carrying case, manual |
| Compliance | EN 61010-1, CE marking |
Frequently Asked Questions - A44 ABB
How do I measure AC voltage with the ABB A44?
Turn the rotary switch to V~ (AC). Insert the black lead into COM and red lead into V/Ω. Connect leads to the source and read the display. The meter will autorange.
What does the auto-range feature do?
Auto-range automatically selects the appropriate measurement range for the signal, simplifying operation. You can override it by pressing the RANGE button to select a fixed range.
How do I enable the backlight?
Press the backlight button (usually marked with a light bulb icon) to turn on the display backlight. It will automatically turn off after a short time to save battery.
How do I replace the battery?
Turn off the meter and remove the test leads. Loosen the screw on the battery compartment cover, slide off the cover, replace the 9V battery with a new one, and reattach the cover.
What is the maximum voltage I can measure?
The ABB A44 can measure up to 1000V DC and 750V AC. Exceeding these limits may damage the meter and pose safety risks.
Does it have a continuity test function?
Yes. Turn the rotary switch to the continuity/diode position (usually marked with a diode symbol). Connect the leads to the circuit; the buzzer will sound if resistance is below approximately 50Ω.
How accurate is the ABB A44?
Typical accuracy for DC voltage is ±0.5% of reading + 3 digits. For AC voltage, ±1.0% of reading + 3 digits. Exact specifications are in the manual.
Can I measure temperature?
Yes. Set the rotary switch to TEMP (°C/°F). Insert the thermocouple adapter into the meter (COM and V/Ω jacks) and connect the thermocouple probe. Ensure the correct type (K-type).
What safety precautions should I observe?
Always use the correct input jacks and range. Do not measure voltages above the rated category. Inspect leads for damage. Remove test leads before opening the case. Use personal protective equipment when necessary.
How do I clean and maintain the meter?
Wipe the exterior with a clean, dry cloth. Do not use solvents or abrasives. Store in a dry environment. Remove the battery if storing for extended periods. Calibration is recommended annually.
User questions about A44 ABB
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual A44 - ABB and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. A44 by ABB.
USER MANUAL A44 ABB
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ABB
Model : A44
Category : Measuring equipment