C13 - Measuring equipment ABB - Free user manual and instructions
Find the device manual for free C13 ABB in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Clamp Meter |
| Model | C13 |
| Brand | ABB |
| Measurement Functions | AC/DC voltage, AC current, resistance, capacitance, frequency, diode test, continuity |
| AC Current Range | 0.01 A to 600 A |
| AC Voltage Range | 0.1 V to 600 V |
| Resistance Range | 0.1 Ω to 40 MΩ |
| Display | 4000-count LCD with backlight |
| Auto-ranging | Yes |
| Data Hold | Yes |
| Jaw Opening | 30 mm |
| Power Supply | 2 x 1.5V AAA batteries |
| Battery Life | Approximately 200 hours |
| Dimensions | 200 x 80 x 40 mm |
| Weight | 300 g (including batteries) |
| Safety Rating | CAT III 600V |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -10°C to 50°C |
| Humidity | ≤75% RH |
| Accessories Included | Test leads, carrying case, batteries, user manual |
| Warranty | 2 years |
Frequently Asked Questions - C13 ABB
How do I measure AC current with the ABB C13?
Set the rotary switch to the AC current range (A~). Open the clamp jaw and clamp around a single conductor. Read the value on the display. Ensure the jaw is fully closed for accurate measurement.
What is the maximum voltage the C13 can measure?
The ABB C13 can measure AC voltage up to 600 V and DC voltage up to 600 V. Do not exceed these limits to avoid damage or injury.
How do I replace the batteries?
Turn off the meter and remove the test leads. Use a screwdriver to open the battery compartment on the back. Replace the two AAA 1.5V batteries, ensuring correct polarity. Close the compartment securely.
Can I measure DC current with the C13?
No, the ABB C13 is designed for AC current measurement only. For DC current, you would need a different model or use a shunt resistor with a DC voltage input.
What does the 'Data Hold' button do?
Press the Data Hold button to freeze the current reading on the display. This is useful for capturing measurements in difficult-to-see locations. Press again to release.
How do I test continuity?
Set the rotary switch to the continuity/ diode position (usually indicated by a sound wave symbol). Insert the test leads into the COM and VΩ inputs. Touch the probes together; you should hear a continuous beep. Then test the circuit; a beep indicates continuity (low resistance).
Is the C13 safe for use in industrial environments?
Yes, the ABB C13 has a safety rating of CAT III 600V, making it suitable for use in distribution panels, motors, and industrial equipment. Always follow safety precautions.
How do I clean and maintain the C13?
Wipe the exterior with a damp cloth and mild detergent if needed. Do not use solvents or abrasives. Store in a dry place. Remove batteries if not used for extended periods.
What is the accuracy of the C13?
Basic accuracy for AC voltage is ±(1.2% + 5 digits) and for AC current ±(2.0% + 5 digits). Refer to the manual for full specifications.
Does the C13 have an auto power-off feature?
Yes, the meter automatically switches off after approximately 15 minutes of inactivity to conserve battery life. Press any button or rotate the switch to wake it up.
User questions about C13 ABB
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual C13 - ABB and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. C13 by ABB.
USER MANUAL C13 ABB
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ABB
Model : C13
Category : Measuring equipment